Concrete Bits

Milwaukee 48-62-3005 Bull Point 18 in.

Milwaukee Bull Point 18 in. Model Number: 48-62-3005 Drop Forged of high grade steel, this Hammer Iron with heat treated work areas is used for demolition work and starting holes in the center of a concrete slab. One per package. Features:Bull Point3/4...

Milwaukee 48-20-4300 Spline Bit 4-Cutter 5/8 in. x 10 in.

Milwaukee Spline Bit 4-Cutter 5/8 in. x 10 in. Model Number: 48-20-4300 Four Cutter Spline Bits have a series of 12 spline that slide into an equal but opposite set of Spline in the drive system of the Spline Drive Hammer. This positive engagement of...

Milwaukee 48-20-4315 Spline Bit 4-Cutter 5/8 x 27 in

Milwaukee Spline Bit 4-Cutter 5/8 in. x 27 in. Model Number: 48-20-4315 Four Cutter Spline Bits have a series of 12 spline that slide into an equal but opposite set of Spline in the drive system of the Spline Drive Hammer. This positive engagement of...

Milwaukee 48-20-5025 SDS+ Thin Wall Core Bit 1-1/2 in.

Milwaukee SDS+ Thin Wall Core Bit 1-1/2 in. Model Number: 48-20-5025 Milwaukees Core Bits are ideal for large hole drilling where depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits is 4-3/8 inch. The...

Milwaukee 48-20-8040 SDS+ 8mm x 160mm 2 Cutter Bit

Milwaukee SDS+ Metric 8mm x 100mm x 160mm 2 Cutter Rotary Hammer Bit Model Number: 48-20-8040 Incorporating the industry standard shank for carbide drilling bits, Milwaukees SDS bits have carbide vacuum brazed to heat treated steel shanks. The sharpened...

Milwaukee 48-20-5420 3-1/8 x 11-3/8 1pc SDS-MAX Core Bit

Milwaukee 3-1/8 in. x 11-3/8 in. One Piece SDS-MAX Core Bit Model Number: 48-20-5420 Milwaukees one piece carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a kerf only. The inside core...

Milwaukee 48-62-2095 Clay Spade

Milwaukee Clay Spade Model Number: 48-62-2095 Drop Forged Hammer Iron with heat treated work areas used for digging in clay and hard dirt. One per package. Features:Clay Spade3/4 inch Hex with 21/32 inch Round Shank4-1/2 inch width x 16-3/4 inch...

Milwaukee 48-62-4045 Ground Rod Driver 1-1/8

Milwaukee Ground Rod Driver 1-1/8 Model Number: 48-62-4045 Forged from high-grade steel for superior strength and durability, this Ground Rod Driving Hammer features a 1-1/8 inch collared hex shank with notch for secure, positive engagement. Trusted by...

Milwaukee 48-20-7554 SDS+ Bit 3/8 x 10 x 12 in 20pk

Milwaukee SDS+ Bit 3/8 in. x 10 in. x 12 in. 20pk Model Number: 48-20-7554 Milwaukees 44 Magnum series carbide drilling bits offers a unique multi-faceted carbide insert reducing the breakage possibility when drilling through re-bar and mesh. The...

Milwaukee 48-20-5402 1-1/2 x 22 1pc SDS-MAX Core Bit

Milwaukee 1-1/2 in. x 22 in. One Piece SDS-MAX Core Bit Model Number: 48-20-5402 Milwaukees one piece carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a kerf only. The inside core must...

Milwaukee 48-03-3572 SDS-MAX Thick Wall Core Bit 12 in. Adapter Shank

Milwaukee SDS-MAX Thick Wall Core Bit 12 in. Adapter Shank Model Number: 48-03-3572 Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your...

Milwaukee 48-17-3042 4-1/4 Diamond Premium Wet Core Bit

Milwaukee 4-1/4 in. Diamond Premium Wet Core Bit Model Number: 48-17-3042 Milwaukee Diamond Premium Wet Core Bits are designed to the highest standards, only using quality diamonds. Available in sizes 3/4in - 14in, Milwaukee Diamond Premium Wet Core...

Milwaukee 48-17-3040 4 in. Diamond Premium Wet Core Bit

Milwaukee 4 in. Diamond Premium Wet Core Bit Model Number: 48-17-3040 Milwaukee Diamond Premium Wet Core Bits are designed to the highest standards, only using quality diamonds. Available in sizes 3/4in - 14in, Milwaukee Diamond Premium Wet Core bits...

Milwaukee 48-20-5173 Guide Plate for 3-1/2 Thick Wall Core Bit

Milwaukee Guide Plate for 3-1/2 in. Thick Wall Core Bit Model Number: 48-20-5173 Increase your precision in masonry and concrete drilling with the Milwaukee Guide Plate for Thick Wall Core Bit. You will see reduced bit walk and improved bit stability...

Milwaukee 48-20-4125 Spline Bit 2-Cutter 1-1/4 in x 16 in

Milwaukee Spline Bit 2-Cutter 1-1/4 in. x 16 in. Model Number: 48-20-4125 Two Cutter Spline Bits have a series of 12 spline that slide into an equal but opposite set of Spline in the drive system of the Spline Drive Hammer. This positive engagement of...

Milwaukee 48-03-3561 SDS+ Thin Core Bit Adapter 12 in.

Milwaukee SDS+ Thin Core Bit Adapter 12 in. Model Number: 48-03-3561 Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. ...

Milwaukee 48-17-0025 2-1/2 in. Dry Core Masonry Bit

Milwaukee 2-1/2 in. Dry Core Masonry Bit Model Number: 48-17-0025 Milwaukee Diamond Dry Core Bits are designed to the highest standards, only using quality diamonds. Available in sizes 1 in.-6 in., Milwaukee Diamond Dry Core Bits are ideal for drilling...

Milwaukee 48-17-6002 5/8-11 6-Slot Core Bit Adapter

Milwaukee Core Bit Adapter for 6-solt to 5/8-11 thread Model Number: 48-17-6002 Features:6-slotted Adapter for 5/8in-11Adaptor for Hilti Core DrillFor use with core bits with 5/8in-11 threadsDesigned for Milwaukee Core Bits Includes:(1) 5/8in-11 6-Slot...

Milwaukee 48-20-7467 SDS+ Bit 7/16 in. x 16 in. x 18 in.

Milwaukee SDS+ Bit 7/16 in. x 16 in. x 18 in. Model Number: 48-20-7467 Milwaukee SDS Drill Bits are durable, and efficient. These SDS Drill Bits have carbide vacuum brazed to heat treated steel shanks. With the Standard SDS Drill Bits, the sharpened...

Milwaukee 48-20-7065 SDS Bit 3/4 in. x 12 in.

Milwaukee SDS Bit 3/4 in. x 12 in. Model Number: 48-20-7065 Incorporating the industry standard shank for carbide drilling bits, Milwaukees SDS bits have carbide vacuum brazed to heat treated steel shanks. The sharpened angle of the carbide creates two...