Product Description
Milwaukee 7 in. x 1/4 in. x 5/8-11 Performance+ Metal Grinding Wheel - Type 27 (5-Pack)
Model Number: 49-94-0637
The Milwaukee 49-94-0637 is a 5-pack of 7 in. x 1/4 in. x 5/8-11 Performance+ Metal Grinding Wheels in the Type 27 depressed-center profile, Milwaukee's premium-tier grinding wheel in its largest diameter with an integrated 5/8-11 threaded hub. That threaded hub is the defining feature of this version: instead of a plain arbor hole that requires a backing flange and lock nut, the wheel threads directly onto a standard 7 in. angle grinder spindle, mounting fast and securely with no flange, nut, or adapter to fumble with. Like the rest of the Performance+ grinding line, it uses premium zirconia grain rather than aluminum oxide, a tougher, self-sharpening abrasive that maintains sharp cutting edges throughout the application for a faster rate of material removal, and an enhanced bonding structure that continuously exposes fresh grain as the wheel wears for sustained efficiency and more control. This is a grinding wheel, not a cut-off wheel: the 1/4 in. thick body and depressed-center Type 27 shape are made to remove material with the face of the wheel. At 7 in., this is the largest grinding wheel in the line, giving the most abrasive surface, the most reach, and the highest removal rate for the large-bodied 7 in. grinders used in heavy production work, and each wheel is built with three full sheets of high-strength fiberglass reinforcement and a higher zirconia grain concentration for durability under the heaviest grinding.
Milwaukee rates the Performance+ grinding line for up to 5X the life in metal grinding versus standard competition, so a single wheel outlasts several standard wheels and means far fewer changes, with a faster removal rate from the premium zirconia grain. The Type 27 depressed-center profile positions the abrasive face below the mounting hub, which lets you grind flat surfaces at a low approach angle for the most productive and least fatiguing sustained grinding. The wheels grind carbon steel, stainless steel, and nickel-based alloys, and stand up to the heaviest ferrous work: thick steel plate and bar, large angle iron, pipe and structural sections, rebar, and big weldments, making them a strong choice for fabrication, welding, construction, and industrial metalworking on large grinders.
These wheels fit 7 in. angle grinders that use a 5/8-11 threaded spindle, and Milwaukee rates them to a maximum of 8,600 RPM, which is lower than the smaller wheels because of the larger diameter, so it is especially important to confirm your grinder's rated speed does not exceed the wheel's rating. Choose this threaded-hub version if your grinder or workflow uses direct-thread mounting; if you run a flange-and-nut setup, the 7/8 in. arbor-hole version of the 7 in. Performance+ wheel is available instead. Because this is a grinding wheel, work with the face for material removal and never use it as a cut-off wheel for edge cutting, just as a thin cut-off wheel should never be used for grinding; matching the wheel to the task is a safety requirement. Always confirm the maximum RPM printed on the wheel meets or exceeds your grinder's rated speed and never exceed it, inspect each wheel before use, keep the guard in place, and wear appropriate eye and face protection when grinding. Supplied as a 5-pack, the 49-94-0637 keeps a supply of long-life 7 in. wheels on hand for heavy production grinding.
Features
- Genuine Milwaukee Performance+ metal grinding wheel with a 5/8-11 threaded hub, 5-pack
- 7 in. diameter, 1/4 in. thickness, 5/8-11 threaded hub, Type 27 depressed center
- Integrated threaded hub mounts directly on the spindle, no flange or lock nut needed
- Largest grinding wheel in the line for the most surface, reach, and removal
- Premium zirconia grain for a faster rate of material removal
- Self-sharpening grain maintains sharp edges throughout the application
- Up to 5X wheel life in metal grinding compared to standard competition
- Enhanced bonding structure releases fresh grain as it wears for more control
- Three full sheets of high-strength fiberglass reinforcement for durability
- Higher zirconia grain concentration for extended life under heavy use
- Grinds carbon steel, stainless steel, and nickel-based alloys
- Rated to a maximum of 8,600 RPM, fits 7 in. grinders with a 5/8-11 spindle
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 49-94-0637
- Product Line: Performance+
- Wheel Diameter: 7 in.
- Wheel Thickness: 1/4 in.
- Arbor: 5/8-11 threaded hub
- Wheel Type: Type 27 (depressed center)
- Abrasive: Premium zirconia grain, enhanced resin bond
- Reinforcement: Three sheets high-strength fiberglass
- Application: Grinding metal and stainless steel
- Maximum RPM: 8,600 - always confirm the rating printed on the wheel and never exceed it
- Pack Quantity: 5-Pack
Includes
- (5) Milwaukee 7 in. x 1/4 in. x 5/8-11 Performance+ Metal Grinding Wheels, Type 27
