Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Rip Fence Knob and Spring Kit
Model Number: 49-22-9940
The Milwaukee 49-22-9940 is a genuine OEM Rip Fence Knob and Spring Kit for the 2834 and 2835 circular saws. It is important to understand what this kit is: it is the locking knob and spring hardware that secures the rip fence to the saw, not the rip fence itself. A rip fence is the adjustable guide arm that slides into the saw's shoe and rides along the edge of the workpiece to guide straight, repeatable rip cuts, and this knob and spring are what clamp that fence in position once it is set. Turning the knob locks the fence at the chosen width, and the spring provides the tension the locking mechanism needs to hold and release properly. Because the knob is handled every time the fence is adjusted and is a small molded part with a working spring, it is a common wear and loss item: a lost knob, a broken knob, or a failed spring means the rip fence can no longer be locked at the set width, and the fence slips or cannot be secured during a cut. Replacing this kit restores the ability to lock the rip fence firmly in place for accurate ripping.
Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee service parts diagram before placing your order, since running production changes can alter part compatibility within the same catalog number. This rip fence knob and spring kit is specified for the 2834 and 2835 circular saws, so confirm your tool's catalog and serial number against the parts diagram before ordering. Note that this kit is the locking hardware only; the rip fence guide arm itself is a separate part, so if the fence arm is also lost or damaged, order it separately. Refer to your tool's parts diagram for the rip fence and any related shoe and mounting components and their correct part numbers.
Features
- Genuine Milwaukee OEM service part, not an aftermarket substitute
- Rip Fence Knob and Spring Kit for the 2834 and 2835 circular saws
- The locking knob and spring hardware that secures the rip fence
- Not the rip fence itself, this is the clamping hardware
- Turning the knob locks the fence at the chosen rip width
- The spring provides the tension the locking mechanism needs
- Restores the ability to lock the rip fence firmly in place
- Corrects a fence that slips or will not secure from a lost knob or failed spring
- A common wear and loss item, handled on every fence adjustment
- Manufactured to Milwaukee specification for correct fit and function
- The rip fence guide arm is a separate part, sold separately
- Verify catalog number and serial number before ordering
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 49-22-9940
- Official Description: Rip Fence Knob and Spring Kit
- Component Type: Rip fence locking hardware (knob and spring)
- Function: Secures and locks the rip fence at the set width
- Primary Fitment: 2834 and 2835 circular saws
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Verify the figure and bulletin number on Milwaukee's online parts lookup
- Includes: Rip fence locking knob and spring
- Quantity: Sold as a kit, (1) required per tool
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Milwaukee 49-22-9940 Rip Fence Knob and Spring Kit (knob and spring)
This kit is the rip fence locking hardware only. The rip fence guide arm itself and any related shoe and mounting components are NOT included and are sold separately - refer to your tool's parts diagram for the correct part numbers and quantities. Always verify by serial number using Milwaukee's online parts lookup before ordering.
