Product Description
Milwaukee SDS+ Floor Scraper 4 in. x 10 in.
Model Number: 48-62-6046
The Milwaukee 48-62-6046 is an SDS+ Floor Scraper with a 4 in. wide blade in 10 in. overall length for use with SDS+ rotary hammers and combination hammers in hammer-only mode — engineered for removing vinyl tile adhesive, carpet adhesive, mastic, sheet flooring, linoleum, and other bonded floor coverings from concrete slabs and other hard floor substrates in renovation, remodeling, and flooring installation preparation work. The 4 in. wide scraper blade provides a practical working width that balances coverage area per stroke with the impact energy available from SDS+ rotary hammers — wide enough to cover meaningful surface area per scraping stroke for productive adhesive removal on large floor areas, while narrow enough to work into corners, perimeters, and around obstacles where wider scraper configurations cannot access. Milwaukee makes this floor scraper from high-grade drop-forged steel with heat-treated working areas for the structural integrity needed to withstand sustained SDS+ impact loading without blade deformation.
Power floor scraping with an SDS+ hammer and scraper attachment dramatically reduces the time and physical effort required for floor covering removal compared to manual hand scraper tools — the SDS+ rotary hammer's high-frequency impact energy drives the scraper blade progressively under the floor covering at a rate that manual scraping cannot approach on large floor areas. Contractors who perform floor tear-out and prep regularly — remodelers, flooring installation contractors, and general contractors opening floors for utility access — find the SDS+ floor scraper to be an essential tool that transforms one of the most physically demanding preparation tasks into manageable power tool work. The 10 in. overall length provides the shank-to-blade geometry needed for the SDS+ hammer's correct working position relative to the floor surface during horizontal scraping operations on flat concrete slabs.
See Milwaukee's complete SDS+ chisel and ground engagement tool lineup for all available scraper widths and for companion tools including bull points, flat chisels, and bushing tools for concrete surface preparation work.
Features
- 4 in. wide blade for productive floor coverage while maintaining corner access capability
- Drop-forged high-grade steel with heat-treated work area for sustained SDS+ impact use
- SDS+ shank for tool-free engagement on SDS+ rotary and combination hammers
- Dramatically faster adhesive removal than manual hand scraping on large floor areas
- For vinyl tile adhesive, carpet mastic, sheet flooring, and bonded floor covering removal
Specifications
- Blade Width: 4 in.
- Overall Length: 10 in.
- Shank: SDS+
- Application: Floor Covering Adhesive and Mastic Removal from Concrete Slabs
Includes
- (1) Milwaukee 48-62-6046 SDS+ Floor Scraper 4 in. x 10 in.
