Product Description
Milwaukee SHOCKWAVE 2 in. Power Bit TORX T30 — 2 Pack
Model Number: 48-32-4914
The Milwaukee 48-32-4914 is a 2-pack of SHOCKWAVE Impact Duty 2 in. Power Bits in TORX T30 — extended-length TORX driver bits for driving T30 fasteners with impact drivers in applications where the additional 2 in. length is needed to reach fasteners that the standard 1 in. insert bit cannot engage without the driver chuck contacting surrounding materials. T30 is a large-diameter TORX specification used in heavy structural screws, large equipment mounting fasteners, deck hardware, and high-torque fastening applications where the larger T30 drive geometry provides superior torque transmission and cam-out resistance for the high driving forces required to fully seat these large-format fasteners. Milwaukee SHOCKWAVE Impact Duty bits are manufactured from proprietary steel with multi-zone heat treatment — hard at the driving tip for T30 profile wear resistance, tough at the shank for impact energy absorption — delivering up to 10x longer life than standard driver bits under impact driver use.
The Shockzone geometry machined into the SHOCKWAVE bit shank absorbs the peak torsional impact energy from each impact driver hammer strike before it reaches the T30 driving tip — the larger T30 profile generates higher driving torques than smaller TORX sizes, and the Shockzone's energy management is particularly valuable at this torque level for maintaining tip geometry and preventing the fatigue cracking that causes standard bits to fail under the sustained high-torque loading of T30 fastener installation. The 2 in. length provides the reach for fasteners recessed in counterbored holes, fasteners inside enclosures and cabinets where the driver chuck needs clearance from the surrounding structure, and any application where the fastener head is set back from the work surface far enough that a 1 in. insert bit cannot extend to it. The 2-pack ensures a backup bit is immediately available.
Also available in 1 in. insert bit format and in 25-pack bulk quantities for high-volume T30 fastener installation — see Milwaukee's SHOCKWAVE TORX lineup for all T30 configurations.
Features
- Milwaukee proprietary SHOCKWAVE steel — up to 10x longer life under impact driver use
- Shockzone absorbs peak impact energy critical at high-torque T30 driving loads
- T30 TORX for heavy structural screws and large equipment mounting fasteners
- 2 in. length for recessed fasteners and applications requiring chuck clearance
- 2-pack for immediate backup availability on high-torque T30 fastening projects
Specifications
- Drive Type: TORX T30
- Length: 2 in. (Power Bit)
- Shank: 1/4 in. Hex
- Quantity: 2 Pack
Includes
- (2) Milwaukee 48-32-4914 SHOCKWAVE 2 in. Power Bits TORX T30
