Product Description
Milwaukee SHOCKWAVE Impact Duty 2 in. TORX T27 Power Bits Bulk 25-Pack
Model Number: 48-32-4786
The Milwaukee 48-32-4786 SHOCKWAVE Impact Duty 2 in. TORX T27 Power Bits Bulk 25-Pack delivers 25 professional-grade impact-rated TORX driver bits in a single jobsite-quantity pack engineered for contractors, deck builders, structural fastener installers, automotive service technicians, equipment installers, and any tradesperson driving T27 TORX fasteners with an impact driver or drill driver. The T27 (TORX size 27) tip is a mid-large TORX specification commonly used for deck and ledger screws, structural connector screws, larger self-tapping sheet metal screws, automotive engine and chassis fasteners, and the wide range of mid-large structural fasteners specified in modern timber construction, prefabricated framing, and equipment assembly. The 2 in. bit length is the standard medium-length specification that fits the vast majority of T27 driving applications, providing enough reach to drive fasteners through standard depths without being so long that the bit flexes or wobbles under impact torque load. The 25-pack bulk configuration is the right purchase for full-time deck contractors and structural framers who use through multiple bits per project, where buying individual bits adds up to a significantly higher per-bit cost over the long term.
The defining engineering feature of the SHOCKWAVE Impact Duty line is the SHOCKZONE shank, the customized intermediate section of the bit specifically engineered for each tip geometry to absorb the peak torque spikes generated by an impact driver. Conventional driver bits transfer impact torque shock directly from the chuck into the bit tip, which is the primary cause of bit breakage and shortened service life under impact use. The SHOCKWAVE SHOCKZONE shank flexes microscopically under peak impact load to absorb the shock, then returns to its original geometry, dramatically extending bit service life across the 25 bits in the pack. The Wear Guard Tip provides additional wear resistance at the critical tip-to-fastener contact area, where conventional driver bits round out and lose their grip on the fastener recess over the life of the bit. The forged tip geometry is engineered specifically for the T27 TORX recess to deliver maximum surface contact and reduced stripping of fasteners on the job. Milwaukee constructs the SHOCKWAVE bits from custom Alloy76 steel with a proprietary heat treatment optimized per tip type, delivering up to 10 times the bit life compared to conventional impact driver bits across the most demanding applications.
The 25-pack bulk configuration delivers significantly lower per-bit cost compared to individual bit purchases (typically $1.79 to $1.99 per bit at retail when purchased individually), making the 48-32-4786 the right purchase for jobsite consumption rather than single-bit replacement scenarios. Each bit is laser etched with the T27 size designation for easy bit identification when working out of a tool pouch or bit case, eliminating the time wasted comparing bits side by side to find the right size. The bits are fully compatible with both impact drivers and standard drill drivers, making them a versatile choice for contractors who switch between tool platforms across a workday. For applications requiring only a single bit at a time rather than the bulk pack, see the Milwaukee 48-32-4486 SHOCKWAVE 2 in. TORX T27 Impact Bit, sold separately. For one size smaller bulk pack, see the Milwaukee 48-32-4185 SHOCKWAVE 2 in. TORX T25 Power Bits 25-Pack, sold separately.
Features
- Bulk pack of 25 SHOCKWAVE Impact Duty driver bits for jobsite consumption volume
- T27 (TORX size 27) tip for mid-large structural and automotive fastener applications
- 2 in. (50 mm) length, the standard medium-length specification for T27 driving
- SHOCKZONE shank customized per tip geometry to absorb peak impact torque and prevent breakage
- Wear Guard Tip provides increased wear resistance at the tip-to-fastener contact area
- Forged tip delivers maximum recess engagement and grip for reduced stripping
- Custom Alloy76 steel construction maximizes resistance to wear and shock
- Custom heat treatment optimized per tip type for longer bit service life
- Up to 10X life compared to standard impact driver bits
- 1/4 in. hex shank fits standard impact driver and drill driver chucks
- Designed for use with impact drivers and drill drivers
- Ideal for deck screws, ledger screws, structural connector screws, sheet metal screws, and automotive fasteners
- Significantly lower per-bit cost compared to individual bit purchases
- Part of Milwaukee's complete SHOCKWAVE Impact Duty driver bit lineup
Specifications
- Manufacturer: Milwaukee Tool
- Catalog Number: 48-32-4786
- Bit Type: Impact-Rated TORX Driver Bit
- Product Line: SHOCKWAVE Impact Duty Power Bit
- Tip Size: T27 (TORX size 27)
- Bit Length: 2 in. (50 mm)
- Pack Quantity: 25 bits (Bulk)
- Shank: 1/4 in. Hex
- Steel Construction: Custom Alloy76 steel
- Heat Treatment: Custom heat treatment optimized per tip type
- Shock Absorption: SHOCKZONE shank geometry optimized per tip type
- Tip Construction: Forged tip with Wear Guard Tip protection
- Marking: Laser etched size identification
- Tool Compatibility: Impact drivers and drill drivers
- Performance: Up to 10X life vs. standard impact driver bits
Includes
- (25) Milwaukee SHOCKWAVE Impact Duty 2 in. TORX T27 Power Bits
- Note: For applications requiring only a single bit at a time rather than the bulk pack, see the Milwaukee 48-32-4486 SHOCKWAVE 2 in. TORX T27 Impact Bit (individual), sold separately
- Note: For one size smaller bulk pack at the same length and pack quantity, see the Milwaukee 48-32-4185 SHOCKWAVE 2 in. TORX T25 Power Bits 25-Pack, sold separately
