Product Description
Milwaukee SHOCKWAVE 2 in. Power Bit Phillips #1
Model Number: 48-32-4461
The Milwaukee 48-32-4461 is a SHOCKWAVE Impact Duty 2 in. Power Bit in Phillips #1 — the smaller Phillips driver specification in the extended 2 in. power bit length for driving #1 Phillips fasteners in applications where the standard 1 in. insert bit leaves the driver chuck too close to the work surface. The #1 Phillips specification drives the smaller fasteners used in light-duty hardware installation, precision equipment assembly, cabinetry trim screws, small electrical device screws, and finish applications where #2 Phillips would be oversized for the screw head. The 2 in. power bit length provides the reach extension over the 1 in. insert bit for counterbored fastener locations, recessed hardware mounting holes, and applications where the chuck needs clearance from the work surface or surrounding materials during fastener engagement and driving.
Milwaukee manufactures SHOCKWAVE Power Bits from proprietary steel with multi-zone heat treatment — the tip zone receives surface hardness treatment for wear resistance under the repeated engagement of #1 Phillips screw heads, while the Shockzone torsional compliance geometry in the shank absorbs peak rotational impact energy from each impact driver hammer strike before it reaches the #1 Phillips tip. At the smaller #1 Phillips cross section, tip wear from impact driver loading is accelerated relative to the larger #2 specification — SHOCKWAVE's tip hardness and Shockzone protection provide up to 10x longer life than standard bits in the same application. The 2-pack format provides an immediately available backup for finish and precision assembly work where replacing a worn bit without interrupting the installation or assembly sequence is important.
See Milwaukee's complete SHOCKWAVE Phillips power bit lineup for all available #1, #2, and #3 sizes in all power bit lengths.
Features
- SHOCKWAVE steel — up to 10x longer life in #1 Phillips under impact driver use
- Shockzone geometry absorbs peak impact energy protecting smaller #1 tip profile
- #1 Phillips for light hardware, trim screws, precision equipment, and finish work
- 2 in. length for recessed fasteners and driver chuck clearance from work surface
- Multi-zone heat treatment for tip hardness and shank toughness
Specifications
- Drive Type: Phillips #1
- Length: 2 in. (Power Bit)
- Shank: 1/4 in. Hex
Includes
- Milwaukee 48-32-4461 SHOCKWAVE 2 in. Power Bit Phillips #1
