Product Description
Milwaukee 2-9/16 in. Switchblade 10-Blade Replacement Kit
Model Number: 48-25-5350
The Milwaukee 48-25-5350 is a 10-blade replacement kit for the Milwaukee 2-9/16 in. Switchblade Self-Feed Wood Boring Bit — the high-volume blade supply for contractors who use the largest standard Switchblade diameter at production pace and need the deepest blade inventory to support sustained drilling without supply interruptions. The 2-9/16 in. diameter is the largest standard Switchblade size, used for the largest plumbing drain and waste rough-in penetrations, large HVAC ductwork openings through wood framing, and structural bolt holes in heavy timber construction where the hole size must accommodate large-format pipes, duct transitions, and hardware. At this large diameter, each cutting blade encounters the maximum material contact area per hole, and blade sharpness degrades more noticeably per hole than at smaller diameters — the 10-blade kit ensures a continuous supply of fresh blades for production-pace large-bore drilling without field supply concerns halting work.
Milwaukee's Switchblade push-button blade release mechanism enables a fresh replacement blade to be snapped into the bit body in approximately 10 seconds at the work location — when the 2-9/16 in. cutting blade dulls during drilling, the worn blade is ejected and a replacement from this kit installed immediately, restoring full sharpness and drilling speed without returning to the truck or purchasing a new complete bit body at the much higher cost of a full bit replacement. Ten blades per kit provides the supply for extended production runs across large projects where the combination of large bore diameter, high hole count, and difficult wood species (dense hardwoods, engineered lumber with high resin content) drives higher blade consumption per day than smaller diameter work. The self-contained storage case protects all blade edges between uses.
Available in 1-blade and 3-blade kit quantities for lower-volume use — see Milwaukee's complete Switchblade replacement blade lineup across all diameters from 1-3/8 in. through 2-9/16 in.
Features
- 10-blade supply for production-pace large-bore drilling at 2-9/16 in. diameter
- Tool-free push-button replacement in approximately 10 seconds at the work location
- 2-9/16 in. — largest standard Switchblade size for major plumbing and HVAC penetrations
- Lower blade replacement cost vs. complete bit body replacement when blades dull
- Available in 1-blade and 3-blade quantities for lower-volume use
Specifications
- Compatible Bit: Milwaukee 2-9/16 in. Switchblade Self-Feed Bit
- Quantity: 10 Blades
- Available Quantities: 1-blade, 3-blade, and 10-blade
Includes
- (10) Milwaukee 2-9/16 in. Switchblade Replacement Cutting Blades
- (1) Self-Contained Storage Case
