Product Description
Milwaukee Mini Flush Cutters
Model Number: 48-22-6105
The Milwaukee 48-22-6105 are Mini Flush Cutters — precision compact cutting pliers for making flush, clean cuts on component leads, zip ties, small wire, and electrical component pins in electronics assembly, circuit board work, control panel installation, and precision electrical assembly where the cut must be flush to the surface with no protruding stub remaining after cutting. Standard diagonal cutters and side cutters leave a small angled stub on the cut wire or lead — the cutting face meets the wire at an angle that bends the wire slightly before cutting, leaving a small protruding end. Flush cutters are designed with a flat, ground cutting face on one side that contacts the work surface or component board directly, producing a cut that is completely flush to the surface with no protruding end, which is required for circuit board component lead trimming, zip tie cutting at the base, and panel wiring applications where protruding stubs would contact adjacent components or create sharp edges that damage wire insulation.
The mini format provides the compact jaw and tool body dimensions needed for working in the dense component environments of control panels, terminal blocks, and circuit board assemblies where standard-size cutters cannot fit between components without risking accidental contact with adjacent parts. Milwaukee builds these cutters with properly hardened cutting edges for the clean, consistent flush cuts that precision electronics and panel work requires — dull or improperly hardened flush cutter edges crush and deform wire and component leads instead of shearing them cleanly flush, requiring additional cleanup work and potentially damaging the component being trimmed. The precision flush cutter is an essential daily-carry tool for electricians who terminate control panels and instrument panels where component lead trimming and flush cable tie cutting are constant ongoing tasks.
See Milwaukee's complete precision cutting and stripping tool lineup for all available specialty and general-purpose cutting plier configurations for electrical and electronics work.
Features
- Flush cutting geometry produces cuts with no protruding stub on leads or zip ties
- Mini format for tight component spaces in panels, terminal blocks, and circuit boards
- Hardened cutting edges for clean shear cuts without lead crushing or deformation
- For component lead trimming, zip tie flush cutting, and precision wire cutting
- Essential for control panel and instrument panel assembly and termination work
Specifications
- Type: Mini Flush Cutters
- Application: Component Lead Trimming, Zip Tie Cutting, Precision Wire Cutting
Includes
- (1) Milwaukee 48-22-6105 Mini Flush Cutters
