Product Description
Milwaukee SDS+ Bit 5/8 in. x 6 in. x 8 in.
Model Number: 48-20-7602
The Milwaukee 48-20-7602 is an SDS+ rotary hammer drill bit in 5/8 in. diameter with a 6 in. working length and 8 in. overall length — an individual extended-length configuration at the 5/8 in. medium anchor diameter providing working reach for through-wall CMU penetrations and longer anchor embedments beyond the standard 6 in. overall configuration. Milwaukee 44 Magnum SDS+ bits feature carbide vacuum-brazed to heat-treated steel shanks with optimized helical fluting for consistent concrete drilling performance at the 5/8 in. bore through the 6 in. working depth. The 8 in. overall length enables drilling through standard CMU block with light finish material, longer anchor embedments where pull-out specifications require greater depth, and drilling positions where the hammer must be held back from the drilling face due to ceiling clearance or adjacent structure preventing close-range positioning.
The 5/8 in. diameter serves medium-duty wedge anchors, sleeve anchors, and structural fastening for equipment mounting, mechanical support hangers, and general commercial structural fastening that require more capacity than smaller anchor systems but do not need the heaviest structural anchor specifications. Milwaukee's flute geometry for this diameter and length combination maintains effective debris evacuation through the full 6 in. working depth in commercial concrete conditions. For production-volume drilling at this diameter and length, Milwaukee offers 25-pack and 100-pack bulk formats for significantly lower per-bit cost than individual purchasing. The SDS+ shank provides tool-free engagement in all SDS+ rotary hammers for fast bit changes throughout production operations.
Features
- Carbide tip vacuum-brazed to heat-treated steel for extended medium anchor drilling
- 5/8 in. for medium-duty structural anchors in commercial construction
- 8 in. overall for CMU through-walls and deeper embedment anchor installations
- Optimized fluting for debris evacuation through full 6 in. working depth
- SDS+ shank — 25-pack and 100-pack available for production-volume purchasing
Specifications
- Diameter: 5/8 in.
- Working Length: 6 in.
- Overall Length: 8 in.
- Shank: SDS+
- Tip: Carbide, Vacuum-Brazed
Includes
- (1) Milwaukee 48-20-7602 SDS+ Bit 5/8 in. x 6 in. x 8 in.
