Product Description
Milwaukee SDS+ Bit 5/16 in. x 4 in. x 6 in.
Model Number: 48-20-7441
The Milwaukee 48-20-7441 is an SDS+ rotary hammer drill bit in 5/16 in. diameter with a 4 in. working length and 6 in. overall length — the standard compact configuration for the 5/16 in. anchor diameter for the typical light-to-medium anchor embedment depths in commercial ceiling and wall applications. Milwaukee 44 Magnum SDS+ bits feature carbide vacuum-brazed to heat-treated steel shanks with optimized fluting for consistent concrete drilling performance. The 5/16 in. diameter serves small wedge anchors, sleeve anchors, and concrete screws at the size range above the smallest 3/16 in. pilot hole specification — used for light-duty structural anchors in the applications where the 3/16 in. anchor is too small for the required load rating and the 3/8 in. anchor size is more capacity than the application requires. The compact 6 in. overall length provides the access advantages of a shorter bit for overhead ceiling anchor installations and confined-space drilling.
The 4 in. working depth covers the typical embedment depths for 5/16 in. anchor hardware in standard commercial concrete at ceiling height and wall positions for conduit support, equipment mounting, and general light structural fastening. For production-volume drilling at this diameter, Milwaukee offers 25-pack and 100-pack bulk formats for significantly lower per-bit cost than individual purchasing. The SDS+ shank provides tool-free engagement in all SDS+ rotary hammers.
See Milwaukee's complete 44 Magnum SDS+ catalog for all available 5/16 in. configurations and pack quantities.
Features
- Carbide tip vacuum-brazed to heat-treated steel for production anchor drilling
- 5/16 in. for small wedge and sleeve anchors above 3/16 in. capacity range
- Compact 6 in. overall for overhead and confined-space drilling positions
- 4 in. working depth for standard light-to-medium anchor embedment applications
- SDS+ shank — 25-pack and 100-pack available for production purchasing
Specifications
- Diameter: 5/16 in.
- Working Length: 4 in.
- Overall Length: 6 in.
- Shank: SDS+
- Tip: Carbide, Vacuum-Brazed
Includes
- (1) Milwaukee 48-20-7441 SDS+ Bit 5/16 in. x 4 in. x 6 in.
