Product Description
Milwaukee SDS+ Bit 3/4 in. x 24 in.
Model Number: 48-20-7067
The Milwaukee 48-20-7067 is an SDS+ rotary hammer drill bit in 3/4 in. diameter with a 24 in. overall length — the maximum extended-reach configuration at the largest standard SDS+ anchor diameter, providing the deepest working depth available for 3/4 in. concrete anchor drilling applications. The 24 in. overall length enables through-wall penetrations in the thickest structural concrete sections, through multi-layer construction assemblies, and deep structural anchor embedments where engineering specifications require the highest available pull-out load ratings at 3/4 in. anchor diameter. Milwaukee 44 Magnum SDS+ bits feature carbide vacuum-brazed to heat-treated steel shanks with optimized helical fluting engineered for effective concrete debris evacuation through the full working depth at this large diameter and extreme length combination.
At 3/4 in. diameter and 24 in. overall length, the flute volume per unit length is adequate for concrete debris transport at this large bore, and Milwaukee calibrates the flute pitch for the specific challenge of maintaining continuous hole evacuation through the extreme depth of this configuration. The 3/4 in. diameter is used for large structural anchors in the highest load-rated wedge anchor, sleeve anchor, and adhesive anchor systems for critical structural connections in commercial and industrial construction. The SDS+ shank provides tool-free engagement in all SDS+ rotary hammers — for the hardest high-strength commercial concrete at this large diameter and depth, the SDS Max platform provides higher impact energy delivery. This is a specialty configuration for applications specifically requiring 3/4 in. bore at the maximum available SDS+ standard length.
See Milwaukee's complete 44 Magnum SDS+ catalog for all available 3/4 in. configurations and for the SDS Max lineup for maximum energy delivery in demanding large-diameter applications.
Features
- 24 in. overall length — maximum reach for 3/4 in. SDS+ at standard configuration
- Carbide tip vacuum-brazed to heat-treated steel for large-bore deep drilling
- 3/4 in. for highest load-rated structural anchor systems in critical connections
- Optimized fluting for debris evacuation through full extended working depth
- SDS+ shank for tool-free engagement on all SDS+ rotary hammers
Specifications
- Diameter: 3/4 in.
- Overall Length: 24 in.
- Shank: SDS+
- Tip: Carbide, Vacuum-Brazed
Includes
- (1) Milwaukee 48-20-7067 SDS+ Bit 3/4 in. x 24 in.
