Product Description
Milwaukee 15/16 in. x 18 in. Ship Auger Bit
Model Number: 48-13-5930
The Milwaukee 48-13-5930 is a 15/16 in. x 18 in. Ship Auger Bit for drilling deep holes through framing lumber, dimensional wood, and nail-embedded wood in electrical, plumbing, and mechanical rough-in applications where the 15/16 in. bore and 18 in. working length are both required for the specific penetration depth through multiple stacked framing members or deep structural assemblies. The 15/16 in. diameter sits between the common 7/8 in. and 1 in. adjacent sizes, serving specific conduit fitting systems, flexible conduit applications, and structural hardware that specifies this precise bore. The self-feed screw tip automatically advances the bit through wood under its own rotational force, and Milwaukee's through-center cutting design provides improved durability in nail-embedded retrofit and remodel drilling conditions where embedded fasteners are regularly encountered during drilling through existing structures.
The 18 in. working length provides the deep reach required for drilling through multiple stacked framing members, double top plates, built-up beams, and thick timber sections in commercial construction where the standard 6-1/2 in. configuration cannot penetrate the full assembly depth from a single drill setup position. Non-stick coated flutes maintain fast chip ejection from the full 18 in. bore depth at this large diameter where the chip volume per revolution is substantial and effective flute action throughout the full depth is critical for maintaining drilling speed without chip packing. The 18 in. configuration is especially valuable for commercial rough-in work where multi-member structural assemblies regularly require drilling depths that exceed what standard auger lengths can reach from a single accessible face position.
Available in 6-1/2 in. standard length for single-member drilling — Milwaukee ship auger bits cover 3/8 in. through 1-1/2 in. in both standard and 18 in. extended configurations.
Features
- Self-feed screw tip for efficient drilling without heavy manual drill pressure
- Through-center cutting design for improved life in nail-embedded retrofit wood
- Non-stick coated flutes for continuous chip ejection through full 18 in. depth
- 15/16 in. specialty bore between common 7/8 in. and 1 in. adjacent sizes
- Available in 6-1/2 in. standard length for single-member drilling
Specifications
- Diameter: 15/16 in.
- Length: 18 in.
- Available Lengths: 6-1/2 in. and 18 in.
Includes
- (1) Milwaukee 48-13-5930 15/16 in. x 18 in. Ship Auger Bit
