Product Description
Milwaukee 15/16 in. x 6 in. Ship Auger Bit
Model Number: 48-13-0933
The Milwaukee 48-13-0933 is a 15/16 in. x 6 in. Ship Auger Bit for drilling clean, fast holes through framing lumber, dimensional wood, and nail-embedded wood in electrical, plumbing, and mechanical rough-in applications where the 15/16 in. diameter provides the correct bore for specific conduit fittings, structural bolt holes, or pipe penetrations requiring this precise diameter. The 15/16 in. size falls between the more common 7/8 in. and 1 in. adjacent sizes, serving applications where those adjacent diameters are slightly too small or unnecessarily large for the specific material being routed. The self-feed screw tip automatically advances the bit into the wood under its own rotational force, eliminating the heavy manual downward drill pressure that causes operator fatigue during the sustained overhead and horizontal drilling that characterizes rough-in work. Milwaukee's through-center cutting design provides improved bit life in nail-embedded wood — the geometry distributes impact loads more effectively when the bit contacts embedded fasteners during retrofit and remodel drilling.
Non-stick coated flutes promote continuous chip ejection throughout the drilling depth, preventing chip packing that slows standard auger bits progressively in deeper holes and risks bit breakage under stalled-bit torsional stress. The 6 in. working length handles standard single-member framing penetrations in typical stud, joist, and rafter dimensions while fitting the confined clearances inside wall and floor assemblies during active rough-in work. The 15/16 in. diameter's self-feed mechanism and coated flutes combine to deliver fast, efficient drilling in the large-bore rough-in drilling range where hole size creates meaningful friction between the bit and the wood being displaced, making the self-feed and non-stick characteristics particularly valuable compared to smaller-diameter bits that encounter less resistance.
Available in 18 in. length for deep multi-member drilling — Milwaukee's ship auger bit range covers 3/8 in. through 1-1/2 in. in both 6 in. and 18 in. configurations.
Features
- Self-feed screw tip for efficient large-diameter boring without heavy drill pressure
- Through-center cutting design for improved life in nail-embedded retrofit wood
- Non-stick coated flutes for continuous chip ejection throughout drilling depth
- 15/16 in. diameter for specific conduit fittings and bolt hole applications
- Available in 18 in. length for deep multi-member and structural drilling
Specifications
- Diameter: 15/16 in.
- Length: 6 in.
- Available Lengths: 6 in. and 18 in.
Includes
- (1) Milwaukee 48-13-0933 15/16 in. x 6 in. Ship Auger Bit
