Product Description
**Milwaukee parts change not only by model# but also by serial number. Milwaukee's site lets you look up your tool's parts diagram. Enter Cat# and Select Service Parts. Also match Serial Number.
Milwaukee Anvil Washer
Model Number: 45-88-1827
The Milwaukee 45-88-1827 is a genuine OEM Anvil Washer for the 2869-20 M18 FUEL ONE-KEY 1 in. Extended Impact Wrench. The anvil washer sits on the anvil, the output shaft that drives the socket, in the front of the impact mechanism, where it takes thrust load and sets the anvil's position as the hammer strikes it. It is greased on both sides and works alongside the anvil and the anvil steel ball to keep the anvil running true and transferring full impact torque to the fastener. Because it bears the thrust of a high-torque impact mechanism, a worn, scored, or missing anvil washer lets the anvil shift, which can cause play, lost torque, or wear on the parts around it. Replacing it with the genuine Milwaukee OEM washer restores the correct thrust face and anvil position, where an off-spec washer may not match the thickness or bear the load.
This anvil washer is identified as the Anvil Washer, Figure 7, on the Milwaukee service parts list for the 2869-20 M18 FUEL ONE-KEY 1 in. Extended Impact Wrench, bulletin 54-26-2980. It works with the 1 in. extended anvil, the 17/32 in. anvil steel ball (02-02-0255), the anvil C-ring (44-90-9001), and the anvil o-ring (34-40-2867), which are separate items, and Milwaukee specifies coating both sides of the anvil washer with grease on assembly. It may also serve the companion 2868-20 (the standard anvil version of this 1 in. wrench) built on the same platform, so verify your tool. Because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering.
Features
- Genuine Milwaukee OEM anvil washer
- For the 2869-20 M18 FUEL ONE-KEY 1 in. Extended Impact Wrench
- Sits on the anvil in the front of the impact mechanism
- Takes thrust load and sets the anvil's position
- Greased on both sides on assembly
- Works with the anvil and the anvil steel ball to keep the anvil true
- Figure 7 on the service parts diagram (bulletin 54-26-2980)
- Works with the 1 in. extended anvil and 17/32 in. steel ball (02-02-0255)
- May also serve the companion 2868-20 (standard anvil version)
- Restores the correct thrust face and anvil position
- Replace if the washer is worn, scored, or missing
- Sold individually
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 45-88-1827
- Official Description: Anvil Washer
- Component Type: Impact wrench anvil thrust washer
- Primary Fitment: Milwaukee 2869-20 M18 FUEL ONE-KEY 1 in. Extended Impact Wrench
- Also Referenced On: May also serve the companion 2868-20; verify by serial using Milwaukee's online parts lookup
- Parts Diagram Position: Figure 7 (bulletin 54-26-2980)
- Quantity: Sold individually (1 washer)
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Anvil Washer
The 1 in. extended anvil, the anvil steel ball (02-02-0255), the anvil C-ring (44-90-9001), and the
