Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee M10 Washer
Model Number: 45-88-0068
The Milwaukee 45-88-0068 is a genuine OEM M10 Washer for use in compatible Milwaukee tools and equipment. An M10 washer is a 10mm flat washer, a simple round metal spacer that fits under a bolt head or a nut. Its job is to distribute the clamping load of the fastener over a wider area of the surface beneath it, which protects that surface, prevents the fastener from pulling through or digging in, and helps the joint stay tight under load and vibration. Though it is a small, simple part, a washer does a real job in a bolted assembly: using the correct washer ensures the fastener seats and clamps as the tool was designed, and a missing, bent, or corroded washer can let a joint loosen or allow the fastener to damage the surface it bears against. This M10 washer is documented in the tool-mounting hardware of the Milwaukee 3000 Compact Core Rig, where it works with the tool mount screw bolt and mount plate to secure the drill to the rig. Replacing a missing or damaged washer with the correct genuine Milwaukee OEM part restores a properly seated, secure fastener joint.
Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, and because a washer is a standard hardware item that can appear on many Milwaukee tools in different positions and quantities, always verify your tool's serial number against the official Milwaukee service parts diagram before ordering to confirm this is the correct washer and the quantity your tool uses at each location. Do not assume washer sizes by appearance, since a tool can use several washers of similar size in different positions, and the diagram is what identifies the correct part number at each location. Washers are also easy to lose during disassembly, so it is worth confirming the quantity your repair needs. The bolt, nut, and the components the washer bears against are separate parts, so refer to your tool's parts diagram for the correct companion part numbers.
Features
- Genuine Milwaukee OEM service part, not an aftermarket substitute
- M10 washer, a 10mm flat washer
- Fits under a bolt head or nut in a bolted assembly
- Distributes the fastener's clamping load over a wider area
- Protects the surface and prevents the fastener from pulling through
- Helps the joint stay tight under load and vibration
- Documented in the tool-mount hardware of the 3000 Compact Core Rig
- Works with the tool mount screw bolt and mount plate on the core rig
- Restores a properly seated, secure fastener joint when missing or damaged
- Standard hardware used across Milwaukee tools and equipment
- Verify fitment, position, and quantity by tool model and serial number
- Sold individually, quantity per tool varies by model
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 45-88-0068
- Official Description: M10 Washer
- Component Type: Flat washer
- Size: M10 (10mm)
- Function: Distributes fastener clamping load and protects the mating surface
- Referenced On: Milwaukee 3000 Compact Core Rig tool-mount hardware - verify by model and serial number
- Also Referenced On: Standard hardware, verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Verify the figure and bulletin number on Milwaukee's online parts lookup
- Quantity: Sold individually, quantity per tool varies by model
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Milwaukee 45-88-0068 M10 Washer
This washer is sold individually. The quantity your tool uses varies by model, so verify the required quantity and position on your tool's parts diagram and order accordingly. The bolt, nut, and components the washer works with are NOT included and are sold separately - refer to your tool's parts diagram for the correct part numbers. Always verify by serial number using Milwaukee's online parts lookup before ordering.
