Product Description
**Milwaukee parts change not only by model# but also by serial number. Milwaukee's site lets you look up your tool's parts diagram. Enter Cat# and Select Service Parts. Also match Serial Number.
Milwaukee Forward/Reverse Shuttle
Model Number: 45-24-9040
The Milwaukee 45-24-9040 is a genuine OEM Forward/Reverse Shuttle for the 2967-20 M18 FUEL 1/2 in. High Torque Impact Wrench. The forward/reverse shuttle is the sliding selector above the trigger that sets the tool's rotation direction: pushed one way it runs forward to drive and tighten, pushed the other it runs in reverse to loosen, and centered it locks the trigger off. As the operator slides it, the shuttle reroutes the switch to reverse motor direction and gives the detent feel that confirms the direction is set before impact torque is applied. Because it is actuated on nearly every fastener and is a fine glass-filled plastic part, the shuttle can crack, wear, stick, or lose its detent, at which point direction changes become unreliable, the tool can switch direction under impact, or it will not lock off. Replacing it with the genuine Milwaukee OEM shuttle restores positive forward, reverse, and center-lock selection with reliable detent action, where an off-spec part may not fit the housing or index the switch correctly.
This forward/reverse shuttle is identified as the Forward/Reverse Shuttle, Figure 45, on the Milwaukee service parts list for the 2967-20 M18 FUEL 1/2 in. High Torque Impact Wrench with friction ring, serial N80A, bulletin 54-26-2910, and it may also serve the companion 2966-20 (the detent-pin version of the same high torque wrench) built on the same platform. Milwaukee uses several different forward/reverse shuttle part numbers across its impact wrench lineup, and they are not interchangeable between tools, so match the shuttle to your exact model. Because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering, so you order the shuttle that fits your tool.
Features
- Genuine Milwaukee OEM forward/reverse shuttle
- For the 2967-20 M18 FUEL 1/2 in. High Torque Impact Wrench
- The sliding selector above the trigger that sets rotation direction
- Forward to drive and tighten, reverse to loosen, center to lock off
- Reroutes the switch and gives the detent feel for the selected direction
- Figure 45 on the service parts diagram (bulletin 54-26-2910, SER N80A)
- May also serve the companion 2966-20 (detent-pin high torque wrench)
- Milwaukee uses several shuttle part numbers; not interchangeable between tools
- Restores positive forward, reverse, and center-lock selection
- Replace if the shuttle is cracked, worn, sticking, or will not lock off
- Sold individually
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 45-24-9040
- Official Description: Forward/Reverse Shuttle
- Component Type: Impact wrench forward/reverse shuttle (direction selector)
- Primary Fitment: Milwaukee 2967-20 M18 FUEL 1/2 in. High Torque Impact Wrench with friction ring, SER N80A
- Also Referenced On: May also serve the companion 2966-20; verify by serial using Milwaukee's online parts lookup
- Parts Diagram Position: Figure 45 (bulletin 54-26-2910)
- Quantity: Sold individually (1 shuttle)
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Forward/Reverse Shuttle
Milwaukee uses several forward/reverse shuttle part numbers across its impact wrenches and they are not interchangeable, so confirm 45-24-9040 is correct for your exact model before ordering. Always verify by serial number using Milwaukee's online parts lookup before ordering.
