Product Description
**Milwaukee parts change not only by model# but also by serial number. Milwaukee's site lets you look up your tool's parts diagram. Enter Cat# and Select Service Parts. Also match Serial Number.
Milwaukee Forward/Reverse Shuttle
Model Number: 45-24-0130
The Milwaukee 45-24-0130 is a genuine OEM Forward/Reverse Shuttle for Milwaukee M18 FUEL impact wrenches. The forward/reverse shuttle is the slide control above the trigger that sets the tool's rotation direction: pushed one way it runs forward to drive and tighten, pushed the other it runs in reverse to loosen, and centered it locks the trigger off. The shuttle rides in the housing and moves the switch contacts and detents, so a clean, positive slide with a firm center lock is what gives the operator reliable direction control. Because it is actuated constantly and is a relatively fine plastic part, the shuttle can crack, wear, or lose its detent feel, at which point direction changes become vague or the tool will not lock off. Replacing it with the genuine Milwaukee OEM shuttle restores positive forward, reverse, and center-lock action, where an off-spec part may not fit the housing or index the switch correctly.
This forward/reverse shuttle is identified as the Forward / Reverse Shuttle, Figure 38, on the Milwaukee service parts lists for the M18 FUEL 2762, 2763, 2764, and 2765 impact wrenches (the -20 and -059 variants), and it works with its shuttle spring (40-50-1135). Important: some of these tools were built with two different switch designs, and the shuttle is unique to each. This part, 45-24-0130, is for the tool built with the switch that has a silver rivet on its side (electronics assembly 14-20-0092, housing assembly 31-44-0869); the tool built with the switch without the rivet uses a different shuttle, 45-24-0022, and its own housing. Identify your switch design before ordering so you get the matching shuttle. Because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering.
Features
- Genuine Milwaukee OEM forward/reverse shuttle
- For Milwaukee M18 FUEL impact wrenches (2762, 2763, 2764, 2765)
- The slide control above the trigger that sets rotation direction
- Forward to drive and tighten, reverse to loosen, center to lock off
- Moves the switch contacts and detents in the housing
- Figure 38 on the service parts diagram
- For the switch design WITH a silver rivet (not the no-rivet design)
- No-rivet switch design uses a different shuttle (45-24-0022)
- Works with its shuttle spring (40-50-1135)
- Restores positive forward, reverse, and center-lock action
- Identify your switch design before ordering
- Replace if the shuttle is cracked, worn, or will not lock off
- Sold individually
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 45-24-0130
- Official Description: Forward / Reverse Shuttle (also listed as Forward/Reverse Switch)
- Component Type: Impact wrench forward/reverse shuttle (direction control)
- Primary Fitment: Milwaukee M18 FUEL 2762, 2763, 2764, 2765 impact wrenches (-20 and -059); switch-with-rivet design
- Also Referenced On: No-rivet switch design uses 45-24-0022; verify by serial using Milwaukee's online parts lookup
- Parts Diagram Position: Figure 38
- Quantity: Sold individually (1 shuttle)
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Forward/Reverse Shuttle
The shuttle spring (40-50-1135) is NOT included and is sold separately. This shuttle is for the switch design with the silver rivet; the no-rivet design uses 45-24-0022, so confirm your switch design before ordering. Always verify by serial number using Milwaukee's online parts lookup before ordering.
