Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Insulated Rubber Boot
Model Number: 45-12-0044
The Milwaukee 45-12-0044 Insulated Boot is a genuine OEM replacement part designed for use on the Milwaukee 2709-20 M18 FUEL 1/2 in. Super Hawg Right-Angle Drill (serial code G60A) and the Milwaukee 2711-20 M18 FUEL 7/16 in. Hex Super Hawg Right-Angle Drill (serial code G61A), both confirmed in Milwaukee service bulletins 54-10-2720 and 54-10-2730. Identified by Milwaukee as the Insulated Boot, this rubber component serves as an electrical insulator that wraps internal high-current components on the Super Hawg platform, isolating them from each other and from the housing to prevent shorts, arcing, and electrical contact between adjacent components during heavy drilling operations. The Super Hawg right-angle drills are among Milwaukee's highest-output cordless tools, generating significant rotational torque and electrical current to drive auger bits, hole saws, and self-feed bits through framing lumber, joists, and rough construction work, which is why proper electrical insulation inside the tool housing is critical to safe, reliable operation.
Manufactured to Milwaukee's exact factory tolerances and rubber compound specifications, this OEM insulated boot restores correct component fitment, full electrical isolation, and the dielectric properties the original Super Hawg housing was designed around. A worn, cracked, torn, hardened, or chemically degraded boot can fail to insulate properly, expose internal current-carrying components, and in severe cases lead to internal shorts or tool failure. Replacing the boot at the first sign of damage or wear is one of the highest-value preventive maintenance steps an owner can perform on a 2709-20 or 2711-20 Super Hawg. Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee 2709-20 or 2711-20 service parts diagram before ordering, since Milwaukee occasionally implements running production changes that affect part compatibility within the same catalog number. The 45-12-0044 is specific to the G60A and G61A platforms, and other Super Hawg variants such as the 2809-20 and 2811-20 use the different 45-12-0020 Insulated Boot. Verify by serial number using Milwaukee's online parts lookup before ordering to confirm correct fitment.
Features
- Genuine Milwaukee OEM replacement, direct factory part for the 45-12-0044 reference
- Compatible with the Milwaukee 2709-20 M18 FUEL 1/2 in. Super Hawg Right-Angle Drill (G60A)
- Compatible with the Milwaukee 2711-20 M18 FUEL 7/16 in. Hex Super Hawg Right-Angle Drill (G61A)
- Insulated rubber boot for internal high-current component isolation
- Prevents shorts, arcing, and electrical contact between adjacent internal components
- Critical for safe operation of the Super Hawg's high-output motor and drive system
- Manufactured to Milwaukee factory tolerances and rubber compound specifications
- Direct-fit replacement, no modification required for installation
- Restores full electrical isolation and dielectric properties after wear, cracking, or chemical degradation
- Critical preventive-maintenance part, replace at first sign of damage to protect internal components and ensure safe operation
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 45-12-0044
- Official Description: Insulated Boot
- Component Type: Internal Rubber Insulator Boot
- Confirmed Compatible Models: 2709-20 (G60A) M18 FUEL 1/2 in. Super Hawg Right-Angle Drill, 2711-20 (G61A) M18 FUEL 7/16 in. Hex Super Hawg Right-Angle Drill
- Service Bulletin References: 54-10-2720 (2709-20) and 54-10-2730 (2711-20)
- Material: Proprietary Milwaukee insulated rubber compound
- Quantity: Sold individually, 1 boot per order
- Part Type: OEM Service Replacement Part
Includes
- (1) Milwaukee 45-12-0044 Insulated Rubber Boot
