Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Cord Protector
Model Number: 44-76-0210
The Milwaukee 44-76-0210 is a genuine OEM Cord Protector replacement for compatible Milwaukee corded power tools — the molded rubber or polymer strain relief boot that fits over the junction between the power cord and the tool body, providing the graduated flexibility needed to prevent the sharp bending and kinking at the cord exit point that is the primary cause of internal wire breakage in corded power tools. The power cord exit point is the highest-stress location on any corded tool's power cord — the cord is bent repeatedly at this single point every time the tool changes position, is set down, or is repositioned during work. Without the cord protector's support, repeated bending concentrates at the exact point where the cord exits the strain relief grip, fatiguing the copper conductors inside the jacket and progressively breaking them — causing intermittent power interruptions, dangerous arcing, and ultimately tool failure and shock hazard.
The cord protector's geometry distributes the bending load over a longer section of cord by providing a graduated stiffness transition from the rigid tool housing to the flexible cord — the tapered or bell-shaped protector guides the cord through a gentle curve rather than a sharp 90° bend at the exit point, dramatically reducing the fatigue stress per bending cycle and extending cord service life at this critical location. Replacing a cracked, torn, or missing cord protector with a genuine Milwaukee OEM part restores the correct strain relief geometry and flexibility transition for the specific cord diameter and tool model. Always verify your Milwaukee tool's model number and serial number at milwaukeetool.com before ordering, as cord protector specifications vary by tool model and cord size.
Features
- Genuine Milwaukee OEM cord protector — correct geometry for specific tool and cord diameter
- Distributes cord bending load to prevent sharp-bend wire fatigue at exit point
- Replace cracked, torn, or missing protector to restore proper strain relief function
- Extends cord service life at the highest-stress exit location from tool body
- Verify tool model and serial number at milwaukeetool.com before ordering
Specifications
- Type: Cord Protector / Strain Relief Boot
- Compatible Tools: Milwaukee Corded Power Tools (verify model and serial number)
Includes
- (1) Milwaukee 44-76-0210 Cord Protector
