Product Description
**Milwaukee parts change not only by model# but also by serial number. Milwaukee's site lets you look up your tool's parts diagram. Enter Cat# and Select Service Parts. Also match Serial Number.
Milwaukee Detent Pin
Model Number: 44-60-5267
The Milwaukee 44-60-5267 is a genuine OEM Detent Pin for the 2962P-20 M18 FUEL 1/2 in. Mid-Torque Impact Wrench, the pin-detent version of the tool. The detent pin is the spring-loaded pin on the anvil that retains the socket: when a socket is pushed onto the square drive, the pin depresses and then springs into the detent hole in the socket, holding it on the anvil so it does not fall off under impact or when the tool is pointed down. It works with the detent spring, which pushes the pin outward, and the two together make the pin-detent retention that this version of the tool is built around. Because the pin is depressed on every socket change and takes the shock of impact driving, it can wear, round over, or stick, at which point sockets no longer click on securely or come off too easily. Replacing it with the genuine Milwaukee OEM pin restores positive socket retention, where an off-spec pin may not seat in the anvil or hold the socket.
This detent pin is identified as the Detent Pin, Figure 30, on the Milwaukee service parts list for the 2962P-20 M18 FUEL 1/2 in. Mid-Torque Impact Wrench, serial L80A. It is specific to the pin-detent anvil, so it is the right part for the 2962P-20 (the pin-detent model), not the friction-ring version of the same tool. It works with the detent spring (40-50-0925) that loads it and the related detent pin for spring (44-60-0022), which are separate items, so if sockets are not retaining, replace the pin and spring together. Because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering, since running production changes can alter part compatibility within the same catalog number.
Features
- Genuine Milwaukee OEM detent pin
- For the 2962P-20 M18 FUEL 1/2 in. Mid-Torque Impact Wrench (pin-detent model)
- The spring-loaded pin on the anvil that retains the socket
- Springs into the socket's detent hole to hold it on the anvil
- Keeps the socket from falling off under impact or when pointed down
- Figure 30 on the service parts diagram (SER L80A)
- For the pin-detent anvil, not the friction-ring version
- Works with the detent spring (40-50-0925) that loads it
- Also serviced with the detent pin for spring (44-60-0022)
- Restores positive socket retention
- Replace if sockets will not click on securely or come off too easily
- Sold individually
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 44-60-5267
- Official Description: Detent Pin
- Component Type: Impact wrench anvil socket-retention detent pin
- Primary Fitment: Milwaukee 2962P-20 M18 FUEL 1/2 in. Mid-Torque Impact Wrench (pin-detent), SER L80A
- Also Referenced On: Verify additional pin-detent impact wrenches using Milwaukee's online parts lookup
- Parts Diagram Position: Figure 30
- Quantity: Sold individually (1 pin)
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Detent Pin
The detent spring (40-50-0925) and the detent pin for spring (44-60-0022) are NOT included and are sold separately; if sockets are not retaining, replace the pin and spring together. This is for the pin-detent model (2962P-20), not the friction-ring version, so confirm your tool before ordering. Always verify by serial number using Milwaukee's online parts lookup before ordering.
