Product Description
**Milwaukee parts change not only by model# but also by serial number. Milwaukee's site lets you look up your tool's parts diagram. Enter Cat# and Select Service Parts. Also match Serial Number.
Milwaukee Pin
Model Number: 44-60-0091
The Milwaukee 44-60-0091 is a genuine OEM Pin for the 2736-20 M18 FUEL 8-1/4 in. Table Saw with ONE-KEY. The pin is a precision steel dowel measuring 4 mm in diameter by 55 mm long, used in the saw's assembly to locate and retain a component or to serve as the pivot axis for a moving part. A pin like this sits in machined bores on both sides of the parts it joins, holding them in precise alignment so the mechanism moves or seats the way it should. Because it is a dimensionally exact part, the correct diameter and length matter: a pin that is the wrong size will not seat in the bores or will let the parts it holds move out of position. Replacing it with the genuine Milwaukee OEM pin ensures the exact 4 mm by 55 mm dimensions and the correct steel, so the component it serves stays located and the mechanism works as designed.
This pin is identified as the Pin, Figure 185, on the Milwaukee service parts list for the 2736-20 M18 FUEL 8-1/4 in. Table Saw with ONE-KEY, bulletin 54-00-2736, and it is also referenced on the related Milwaukee table saw bulletin 54-40-2760R, near the miter gauge clip (42-70-0026). Milwaukee uses distinct part numbers for pins of different diameters and lengths, so order the pin by its exact part number from the service parts diagram rather than by appearance; a 4 by 55 mm pin is not interchangeable with a pin of another size on the same saw. Because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering, since running production changes can alter part compatibility within the same catalog number.
Features
- Genuine Milwaukee OEM pin
- For the 2736-20 M18 FUEL 8-1/4 in. Table Saw with ONE-KEY
- Precision steel pin, 4 mm diameter by 55 mm long
- Locates and retains a component, or serves as a pivot axis
- Seats in machined bores to hold parts in precise alignment
- Figure 185 on the service parts diagram (bulletin 54-00-2736)
- Also referenced on related table saw bulletin 54-40-2760R
- Order by exact part number; not interchangeable with other-size pins
- Ensures the correct 4 by 55 mm dimensions and steel
- Replace if the pin is bent, worn, or lost
- Sold individually
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 44-60-0091
- Official Description: Pin (Dia 4 x 55 mm)
- Component Type: Precision steel locating / pivot pin
- Primary Fitment: Milwaukee 2736-20 M18 FUEL 8-1/4 in. Table Saw with ONE-KEY
- Also Referenced On: Related table saw bulletin 54-40-2760R; verify using Milwaukee's online parts lookup
- Parts Diagram Position: Figure 185 (bulletin 54-00-2736)
- Dimensions: 4 mm diameter x 55 mm length
- Quantity: Sold individually (1 pin)
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Pin (4 mm x 55 mm)
Order this pin by its exact part number, since a 4 by 55 mm pin is not interchangeable with pins of other sizes on the same saw. Always verify by serial number using Milwaukee's online parts lookup before ordering.
