Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Detent Pin
Model Number: 44-60-0014
The Milwaukee 44-60-0014 Detent Pin is a genuine OEM replacement part designed for the Milwaukee 2755-20 (serial code G78A) M18 FUEL 1/2 in. Compact Impact Wrench with Pin Detent, and the matching 2755-22 kit configuration. The detent pin is the small spring-loaded steel pin installed in the anvil's 1/2 in. square drive, which springs outward to engage a groove in the socket bore when a socket is installed onto the anvil, locking the socket in place against the high rotational and impact forces the tool generates during fastener driving. To remove the socket, the operator depresses the pin inward against its spring to release the socket from the anvil. The pin detent system provides positive socket retention that is essential for high-torque impact work, automotive, mechanical, and industrial applications where a socket coming loose during use is unacceptable for safety or productivity reasons.
A worn, bent, broken, or missing detent pin prevents the anvil from holding sockets reliably, allowing them to fall off during use, which creates both a safety hazard and a major productivity loss. A weak detent spring will allow the pin to retract too easily under impact load, causing the socket to walk off the anvil during heavy fastener work. Replacing the pin with this OEM service part restores correct socket retention and reliable anvil function. Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee 2755-20 service parts diagram before ordering. The 44-60-0014 is specific to the 2755-20 G78A Pin Detent platform and is NOT compatible with the friction-ring variants of the same impact wrench family (2754-20 and 2756-20), which use a friction-ring collar for socket retention rather than a detent pin. Verify by serial number using Milwaukee's online parts lookup before ordering to confirm correct fitment.
Features
- Genuine Milwaukee OEM replacement, direct factory part for the 44-60-0014 reference
- Designed for the Milwaukee 2755-20 (G78A) M18 FUEL 1/2 in. Compact Impact Wrench with Pin Detent
- Also fits the matching Milwaukee 2755-22 kit configuration
- Spring-loaded steel pin engages socket bore groove for positive socket retention
- Depresses inward for tool-free socket release
- Critical for safe operation during high-torque impact applications
- Made of metal for durability under repeated impact forces
- Manufactured to Milwaukee factory tolerances, pin diameter, and spring rate specifications
- Direct-fit replacement, no modification required for installation
- Restores reliable socket retention after wear, bending, or breakage of the original pin
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 44-60-0014
- Official Description: Detent Pin
- Component Type: Impact Wrench Anvil Detent Pin
- Primary Fitment: Milwaukee 2755-20 (G78A) M18 FUEL 1/2 in. Compact Impact Wrench with Pin Detent, plus the matching 2755-22 kit
- Anvil Drive Size: 1/2 in. square (Pin Detent style)
- Material: Metal
- Item Weight: 0.01 lb
- Quantity: Sold individually, 1 pin per order
- Part Type: OEM Service Replacement Part
Includes
- (1) Milwaukee 44-60-0014 Detent Pin
- Note: This detent pin is specific to the 2755-20 (G78A) Pin Detent platform. It is NOT compatible with the friction-ring variants (2754-20, 2756-20) which use a friction-ring collar instead, and is NOT interchangeable with other Milwaukee detent pins (44-60-0597, 44-60-1160, 44-60-1170, 44-60-5267) which serve different impact wrench platforms
- Note: Verify your tool's catalog number (2755-20) and serial number against the official Milwaukee parts diagram before ordering
