Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Fixed Blade Holder and Set Screw Kit
Model Number: 43-72-0314
The Milwaukee 43-72-0314 is a genuine OEM Fixed Blade Holder and Set Screw Kit for the 2776-20 M18 FORCE LOGIC 3 in. Underground Cable Cutter and the 2777-20 M18 FORCE LOGIC 1590 ACSR Cutter. On these FORCE LOGIC utility cutters, the cutting action shears the cable between a moving blade and a stationary, or fixed, blade, and the fixed blade holder is the component in the cutter head that secures and positions that fixed blade so it provides the solid, aligned counter-edge the moving blade cuts against. Correct fixed-blade positioning is essential to clean, complete cuts through heavy underground cable and overhead ACSR transmission conductor, which is exactly the demanding utility work these tools are built for. This kit supplies the fixed blade holder together with its set screw, the fastener that locks the holder or blade in its correct position, so the mounting hardware comes with the holder. Because the holder takes the full shear load of every cut and is serviced when the cutter head is rebuilt, it is a wear and service item: a worn, cracked, or damaged fixed blade holder lets the blade shift, which degrades cut quality and blade alignment. Replacing it with the correct genuine Milwaukee OEM kit restores proper, secure fixed-blade mounting.
Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee service parts diagram before placing your order, since running production changes can alter part compatibility within the same catalog number. This fixed blade holder and set screw kit is specified for the 2776-20 and 2777-20 FORCE LOGIC cutters, so confirm your tool's catalog and serial number against the parts diagram before ordering. The replacement cutter blade set, the moving-blade and pin components, the trip lever, and the cutter head body that work with the fixed blade holder are separate parts, so refer to your tool's parts diagram for the correct companion part numbers, and lubricate with the Milwaukee-specified grease (Type S2, No. 49-08-5265) where the bulletin directs when servicing the cutter head. Because these are FORCE LOGIC utility cutting tools, follow the correct service procedure and note that Milwaukee restricts certain repairs to authorized service personnel.
Features
- Genuine Milwaukee OEM service part, not an aftermarket substitute
- Fixed Blade Holder and Set Screw Kit for FORCE LOGIC cable cutters
- For the 2776-20 Underground Cable Cutter and 2777-20 ACSR Cutter
- Secures and positions the stationary fixed blade in the cutter head
- Provides the solid, aligned counter-edge the moving blade cuts against
- Essential to clean, complete cuts through heavy cable and ACSR conductor
- Supplied as a kit with the fixed blade holder and its set screw
- Restores proper, secure fixed-blade mounting when worn or damaged
- Takes the full shear load of every cut, a service item
- Manufactured to Milwaukee specification for correct fit and blade alignment
- Cutter blade set, moving blade, and trip lever are separate parts, sold separately
- Verify catalog number and serial number before ordering
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 43-72-0314
- Official Description: Fixed Blade Holder and Set Screw Kit
- Component Type: Fixed (stationary) blade holder for a cable cutter head
- Includes: Fixed blade holder and set screw
- Primary Fitment: 2776-20 M18 FORCE LOGIC Underground Cable Cutter and 2777-20 M18 FORCE LOGIC 1590 ACSR Cutter
- Lubrication: Type S2 Grease, No. 49-08-5265
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Figure 71 on the 2776-20 and 2777-20 service parts lists
- Quantity: Sold as a kit, (1) required per tool
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Milwaukee 43-72-0314 Fixed Blade Holder
- (1) Set Screw
The replacement cutter blade set, moving-blade and pin components, trip lever, cutter head body, and grease that work with the fixed blade holder are NOT included, vary by tool, and are sold separately - refer to your tool's parts diagram for the correct part numbers and quantities. Always verify by serial number using Milwaukee's online parts lookup before ordering.
