Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Outer Blade Flange
Model Number: 43-34-0052
The Milwaukee 43-34-0052 is a genuine OEM Outer Blade Flange for the 2831-20 M18 FUEL Track Saw. The outer blade flange is the metal flange that sits on the outward-facing side of the saw blade on the spindle. When the blade bolt is tightened, the outer flange clamps against the face of the blade and works together with the inner blade flange to secure the blade firmly and concentrically on the spindle during cutting. That secure, square clamping is what keeps the blade running true, which on a track saw is essential to the clean, splinter-free, dead-straight cuts the tool is built to produce. Because the flange is a machined part that carries the clamping load of the blade, a flange that is cracked, bent, worn, or corroded can no longer clamp the blade correctly, and a blade that is not held securely can shift, wobble, or run out during cutting, which is a serious safety hazard as well as a cause of poor cut quality. Replacing a damaged outer flange with the correct genuine Milwaukee OEM part restores proper blade clamping and safe, accurate operation, since an out-of-spec flange cannot be counted on to hold the blade true.
Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee service parts diagram before placing your order, since running production changes can alter part compatibility within the same catalog number. This outer blade flange is specified for the 2831-20 M18 FUEL Track Saw, so confirm your tool's catalog and serial number against the parts diagram before ordering. A wrench is required to remove the blade bolt when replacing the flange. The inner blade flange, blade bolt, and blade are companion parts sold separately, so when replacing the outer flange, inspect the inner flange and blade bolt at the same time and replace them if worn or damaged, since these parts work together to retain the blade.
Features
- Genuine Milwaukee OEM service part, not an aftermarket substitute
- Outer Blade Flange for the 2831-20 M18 FUEL Track Saw
- Metal flange on the outward-facing side of the blade on the spindle
- Clamps against the blade face when the blade bolt is tightened
- Works with the inner blade flange to secure the blade on the spindle
- Keeps the blade running true for clean, straight track saw cuts
- A cracked, bent, or worn flange lets the blade shift, a serious safety hazard
- Restores proper blade clamping and safe, accurate operation
- Manufactured to Milwaukee specification for correct fit and clamping
- A wrench is required to remove the blade bolt when replacing the flange
- Inner flange, blade bolt, and blade are companion parts sold separately
- Verify catalog number and serial number before ordering
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 43-34-0052
- Official Description: Outer Blade Flange
- Component Type: Blade retention flange, outer
- Material: Metal
- Primary Fitment: 2831-20 M18 FUEL Track Saw
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Verify the figure and bulletin number on Milwaukee's online parts lookup
- Quantity: Sold individually, (1) required per tool
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Milwaukee 43-34-0052 Outer Blade Flange
The inner blade flange, blade bolt, and saw blade are NOT included, vary by tool, and are sold separately - refer to your tool's parts diagram for the correct part numbers and quantities. Always verify by serial number using Milwaukee's online parts lookup before ordering.
