Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee QUIK-LOK Chuck Sleeve
Model Number: 42-76-0260
The Milwaukee 42-76-0260 Sleeve is a genuine OEM replacement part designed for the Milwaukee 2865-20 M18 FUEL 7/16 in. Hex Utility High Torque Impact Wrench with ONE-KEY, the lineman-focused utility impact built around Milwaukee's industry-first QUIK-LOK 7/16 in. hex chuck. The sleeve is the spring-loaded collar at the front of the QUIK-LOK chuck that the operator pulls back to release the 7/16 in. hex bit, auger, socket, or accessory and that springs forward to lock the new accessory in place. The QUIK-LOK design is what allows the lineman to perform single-handed bit changes while in a bucket, on hooks, or climbing, keeping one hand firmly on the tool's handle and the other free for the bit swap. Smooth, reliable sleeve operation is essential for safe, efficient work in elevated positions where dropping a bit or fumbling a changeover is more than just an inconvenience. Manufactured to Milwaukee's exact factory tolerances, this OEM sleeve restores correct retraction travel, return spring action, and locking engagement on the QUIK-LOK chuck after wear, contamination, deformation, or impact damage to the original sleeve.
Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee 2865-20 service parts diagram before ordering, since Milwaukee occasionally implements running production changes that affect part compatibility within the same catalog number. The 42-76-0260 is the chuck sleeve specific to the 2865-20 platform and is not interchangeable with sleeves from Milwaukee's 1/2 in. square drive M18 FUEL High Torque Impact Wrenches (2767-20, 2863-20, 2864-20, 2867-20) or other Milwaukee impact platforms, since the QUIK-LOK 7/16 in. hex chuck has a different mechanical design than square-drive anvil-and-pin or anvil-and-friction-ring retention systems. When the chuck stops releasing accessories cleanly, fails to lock onto a new bit, or feels rough or sticky during retraction, the sleeve and its associated spring and detent components are the most common service items. Verify by serial number using Milwaukee's online parts lookup before ordering to confirm correct fitment for your specific 2865-20.
Features
- Genuine Milwaukee OEM replacement, direct factory part for the 42-76-0260 reference
- Designed for the Milwaukee 2865-20 M18 FUEL 7/16 in. Hex Utility High Torque Impact Wrench
- Spring-loaded chuck sleeve for the QUIK-LOK 7/16 in. hex chuck system
- Pull back to release accessory, spring-forward action locks the new bit in place
- Enables single-handed bit changes for lineman and utility work in elevated positions
- Compatible with 7/16 in. hex shank augers, sockets, and lineman accessories
- Manufactured to Milwaukee factory tolerances for correct retraction travel and locking engagement
- Direct-fit replacement, no modification required for installation
- Restores smooth chuck operation and reliable bit retention after wear or impact damage
- Premium fit and finish for jobsite environments common to utility, line work, and industrial applications
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 42-76-0260
- Official Description: Sleeve
- Component Type: QUIK-LOK Chuck Sleeve, 7/16 in. Hex
- Primary Fitment: 2865-20 M18 FUEL 7/16 in. Hex Utility High Torque Impact Wrench with ONE-KEY
- Service Bulletin Reference: 54-00-2865
- Chuck Type: QUIK-LOK 7/16 in. Hex
- Tool Application: Utility, Lineman, Pole Framing, Hardware Removal
- Quantity: Sold individually, 1 sleeve per order
- Part Type: OEM Service Replacement Part
Includes
- (1) Milwaukee 42-76-0260 QUIK-LOK Chuck Sleeve
- Note: Sleeve spring, support washer, retaining ring, and other internal QUIK-LOK chuck components are NOT included and sold separately
- Note: Front housing, gearbox internals, hammer, lanyard loop, and other tool components are NOT included and sold separately
- Note: This sleeve is specific to the 2865-20 7/16 in. hex utility platform with QUIK-LOK chuck. It is NOT compatible with Milwaukee's 1/2 in. square drive M18 FUEL High Torque Impact Wrenches (2767-20, 2863-20, 2864-20, 2867-20) or other Milwaukee impact platforms
- Note: Verify your tool's catalog number (2865-20) and serial number against the official Milwaukee parts diagram before ordering
