Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee 7/16 in. Hex Chuck Assembly
Model Number: 42-66-0055
The Milwaukee 42-66-0055 is a genuine OEM 7/16 in. Hex Chuck Assembly for the 2811-20 M18 FUEL 7/16 in. Super-Hawg. The Super-Hawg is a high-torque right-angle drill built for boring large-diameter holes through studs, joists, and plates, and the 7/16 in. hex chuck is the keyless, quick-change accessory holder at the drill's output. The 7/16 in. designation describes the hex drive the chuck accepts: it is sized to receive 7/16 in. hex-shank drilling accessories, such as self-feed bits, auger bits and auger bit adapters, and 7/16 in. quick-change arbors, locking the shank into the chuck for high-torque drilling. Its quick-lock mechanism allows keyless, one-handed bit changes: the chuck engages the hex shank squarely and locks it securely against pull-out during drilling, then releases cleanly when the operator actuates the quick-release for a bit change. Because the chuck takes the full drilling torque of the Super-Hawg and sees repeated bit changes, it is a wear item: a worn, cracked, or non-releasing chuck that no longer retains bits securely, or that will not release for a bit change, requires replacement. Replacing it with the correct genuine Milwaukee OEM chuck assembly restores secure bit retention and reliable, tool-free bit changes.
Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee service parts diagram before placing your order, since running production changes can alter part compatibility within the same catalog number. This 7/16 in. hex chuck assembly is specified for the 2811-20 M18 FUEL 7/16 in. Super-Hawg, so confirm your tool's catalog and serial number against the parts diagram before ordering. Note that this chuck accepts 7/16 in. hex-shank drilling accessories; it is not a 1/4 in. hex bit holder for screwdriving, and it is specific to the 7/16 in. Super-Hawg, which is a different, larger tool than the 7/16 in. Hole-Hawg that uses the 42-66-0050 chuck. The gearcase, output shaft, and the screw that secures the chuck are separate parts, so refer to your tool's parts diagram for the correct companion part numbers, and follow the correct service procedure when installing the chuck.
Features
- Genuine Milwaukee OEM service part, not an aftermarket substitute
- 7/16 in. Hex Chuck Assembly for the 2811-20 M18 FUEL 7/16 in. Super-Hawg
- The keyless, quick-change accessory holder at the Super-Hawg output
- Accepts 7/16 in. hex-shank drilling accessories
- For self-feed bits, auger bits, and 7/16 in. quick-change arbors
- Quick-lock mechanism for keyless, one-handed bit changes
- Engages the hex shank squarely and locks it against pull-out
- Releases cleanly when the quick-release is actuated for a bit change
- Restores secure retention and tool-free bit changes when worn or non-releasing
- For the M18 FUEL 7/16 in. Super-Hawg right-angle drill
- Not a 1/4 in. hex bit holder; distinct from the 42-66-0050 Hole-Hawg chuck
- Verify catalog number and serial number before ordering
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 42-66-0055
- Official Description: 7/16 in. Hex Chuck Assembly
- Component Type: Super-Hawg keyless quick-change output chuck
- Drive Size: 7/16 in. hex
- Accepts: 7/16 in. hex-shank drilling accessories (self-feed bits, auger bits, quick-change arbors)
- Primary Fitment: 2811-20 M18 FUEL 7/16 in. Super-Hawg
- Parts Diagram Position: Figure 101 on the 2811-20 Super-Hawg service parts list (bulletin 54-10-2750)
- Related Part: 42-66-0050 7/16 in. Hex Chuck Assembly (for the Hole-Hawg 2708/2808)
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Quantity: Sold as an assembly, (1) required per tool
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Milwaukee 42-66-0055 7/16 in. Hex Chuck Assembly
The gearcase, output shaft, chuck screw, and other components that work with the chuck are NOT included, vary by tool, and are sold separately - refer to your tool's parts diagram for the correct part numbers and quantities. Always verify by serial number using Milwaukee's online parts lookup before ordering.