Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukees website please click here:
Milwaukee Front Guide Roller Kit for 4-3/4 in. Deep Cut Band Saws 6230N, 6236N, and 6238N Series
Model Number: 42-28-0395
The Milwaukee 42-28-0395 is a genuine OEM Front Guide Roller Kit for Milwaukee 4-3/4 in. Deep Cut Band Saws including the 6230N, 6232-6N, 6236N, and 6238N — always verify by serial number. The front guide roller kit is the blade guide assembly at the front of the band saw that supports the blade both above and below the cutting table — it keeps the blade running in correct vertical alignment and prevents lateral deflection during cutting operations. The guide block holds the rollers in the correct position relative to the blade, and the rollers provide a low-friction contact surface that guides the blade through the cut path while allowing the blade to track freely. Worn, cracked, or damaged guide rollers that no longer provide clean blade support will cause blade deflection, wandering cuts, and premature blade wear, and require replacement to restore accurate cutting performance on the compatible band saw models. A screwdriver and Torx bits are required for removal and installation.
The rear guide roller kit is a companion part sold separately — when the front guide rollers are worn, the rear guide rollers should be inspected and replaced together if they show similar wear to fully restore blade guidance on the compatible Milwaukee band saw models. Always verify your saw's catalog number and serial number before ordering to confirm this is the correct front guide roller kit for your specific unit.
Features
- Genuine Milwaukee OEM front guide roller kit for Deep Cut Band Saws 6230N, 6232-6N, 6236N, and 6238N — verify by serial number
- Guides blade above and below the cutting table for straight, accurate cuts
- Metal guide block and rollers resist wear during extended band saw cutting operations
- Screwdriver and Torx bits required for installation — use medium-strength thread locker on mounting screws
- Rear guide roller kit sold separately — inspect and replace together for complete blade guidance restoration
Specifications
- Type: Front Guide Roller Kit (Blade Guide Assembly)
- Material: Metal
- Compatible Tools: Milwaukee 4-3/4 in. Deep Cut Band Saws 6230N, 6232-6N, 6236N, and 6238N — verify by serial number
- Compatibility: Always verify part compatibility using your tool's model and serial number before ordering
Includes
- (1) Guide Block
- Rollers
- (2) Mounting Screws
