Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee 7/16 in. Hex Utility Impact Anvil Service Kit
Model Number: 42-06-0000
The Milwaukee 42-06-0000 Anvil Service Kit is a genuine OEM replacement service kit designed for the Milwaukee 2865-20 M18 FUEL 7/16 in. Hex Utility High Torque Impact Wrench with ONE-KEY, Milwaukee's professional utility impact wrench engineered specifically for electrical linemen, power distribution technicians, utility crews, and industrial contractors working with 7/16 in. hex-shank utility fasteners, augers, sockets, and drilling accessories on power transmission and distribution equipment. The anvil is the output drive component at the head of the impact wrench - the rotating internal component that receives the rapid hammer blows from the impact mechanism and transmits them through the QUIK-LOK 7/16 in. hex chuck to the utility bit or accessory installed at the chuck. On the 2865-20 platform, the anvil is specifically engineered to work with the industry-first QUIK-LOK 7/16 in. hex chuck, which delivers single-handed bit insertion that keeps one hand firmly on the tool's handle during bit changes - critical when working from a bucket truck, on a pole, or climbing utility structures where a two-handed bit change is impractical or unsafe.
A worn, cracked, chipped, or damaged anvil compromises the impact wrench's ability to deliver full torque to the fastener, causes the QUIK-LOK chuck to lose grip on utility bits and sockets during operation, and can allow bits to eject unexpectedly under high-torque loads. Symptoms of a failing anvil include the tool no longer delivering the full 750 ft-lbs max torque specification, bits slipping in the chuck during operation, difficulty retaining sockets or augers in the chuck, visible damage or wear at the anvil hex bore, or unusual noise from the tool head during impacting. This service kit provides the anvil assembly with all associated components required for a complete anvil replacement, restoring the QUIK-LOK chuck's grip integrity and the impact wrench's full torque transmission specification. Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee 2865-20 service parts diagram before ordering. The 42-06-0000 is specific to the 2865-20 M18 FUEL Utility High Torque Impact Wrench platform and is NOT interchangeable with the many other Milwaukee anvil service kits and anvil assemblies serving different Milwaukee impact tools, including the 42-06-0020 1/4 in. Hex Anvil (for impact drivers), 42-06-0025 3/8 in. Square Anvil, 42-06-0059 1/2 in. Anvil Service Kit, 42-06-0139 1/4 in. Ratchet Anvil Kit (2566-20), 42-06-0650 1/2 in. Square Anvil, 42-06-2552 1/4 in. Square Anvil (2552/2553-20), and 42-06-2556 1/4 in. Ratchet Anvil Kit (2556-20), which all serve different Milwaukee impact tool platforms with different drive sizes, chuck geometries, and impact mechanism interfaces. Verify by serial number using Milwaukee's online parts lookup before ordering to confirm correct fitment.
Features
- Genuine Milwaukee OEM replacement service kit, direct factory part for the 42-06-0000 reference
- Designed specifically for the Milwaukee 2865-20 M18 FUEL 7/16 in. Hex Utility High Torque Impact Wrench with ONE-KEY
- 7/16 in. hex chuck anvil for utility bit, socket, and auger drive applications
- Compatible with Milwaukee's industry-first QUIK-LOK 7/16 in. Hex Chuck design
- Enables single-handed bit insertion for safe operation from bucket trucks and climbing positions
- Complete service kit includes anvil assembly with associated retention components
- Restores the 2865-20's full 750 ft-lbs max torque specification after anvil wear
- Restores QUIK-LOK chuck grip integrity for reliable bit and socket retention
- Engineered to withstand the rapid, high-cycle impact loads of the POWERSTATE brushless mechanism
- Critical for the 30 percent faster drilling speed the 2865-20 was engineered to deliver
- Ideal for electrical linemen, power distribution technicians, and utility contractors
- Manufactured to Milwaukee factory tolerances and material specifications
- Direct-fit replacement, no modification required for installation
- Replaces the anvil when the original is worn, cracked, chipped, or damaged
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 42-06-0000
- Official Description: Anvil Service Kit
- Component Type: Impact Wrench Output Drive Anvil Service Kit
- Drive Size: 7/16 in. Hex (with QUIK-LOK Chuck)
- Primary Fitment: Milwaukee 2865-20 M18 FUEL 7/16 in. Hex Utility High Torque Impact Wrench with ONE-KEY
- Tool Torque Specification Supported: Up to 750 ft-lbs Max Torque
- Tool Platform: Milwaukee M18 FUEL System
- Kit Contents: Anvil assembly with associated retention components for complete anvil replacement
- Related but NOT Interchangeable Parts: Milwaukee 42-06-0020 (1/4 in. Hex Anvil), 42-06-0025 (3/8 in. Square Anvil), 42-06-0059 (1/2 in. Anvil Kit), 42-06-0139 (1/4 in. Ratchet Anvil Kit), 42-06-0650 (1/2 in. Square Anvil), 42-06-2552 (1/4 in. Square Anvil), 42-06-2556 (1/4 in. Ratchet Anvil Kit) - all serve different Milwaukee impact tools
- Quantity: Sold as a complete service kit, 1 per order
- Part Type: OEM Service Replacement Kit
Includes
- (1) Milwaukee 42-06-0000 Anvil Service Kit
- NOT Included: The 2865-20 M18 FUEL 7/16 in. Hex Utility High Torque Impact Wrench itself. This is a service replacement kit only, sold separately from the tool
- NOT Included: Other internal impact mechanism components (hammer, springs, gearcase). These vary by tool revision and should be inspected during anvil service. Refer to your specific tool's service parts diagram for the correct part numbers, sold separately
- Note: This part is specifically for the Milwaukee 2865-20 M18 FUEL 7/16 in. Hex Utility Impact Wrench and is NOT interchangeable with anvil service kits and anvil assemblies for other Milwaukee impact drivers, impact wrenches, or ratchets, which all use different drive sizes, chuck geometries, and impact mechanism interfaces
- Note: Verify your tool's catalog number (2865-20) and serial number against the official Milwaukee parts diagram before ordering
