Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Clamping Ring
Model Number: 34-80-2985
The Milwaukee 34-80-2985 is a genuine OEM Clamping Ring for the 8960-20 8 Gallon Dust Extractor. On this tool the clamping ring retains a rear wheel on the wheel axle of the rolling base, holding the wheel in its correct position on the axle so it turns freely without working loose or sliding off. The extractor uses two of these rings, one at each rear wheel, so they are paired with the wheel axle, the rear wheels, and the wheel caps that make up the rolling base. A clamping ring that is stretched, deformed, or lost lets the wheel develop play or come off the axle, which makes the extractor hard to roll and can let a wheel fall away during transport. Replacing it with the genuine Milwaukee OEM ring restores the correct clamp force and groove fit, where an off-spec ring may not hold the wheel securely.
This clamping ring is identified as the Clamping Ring, Figure 7 on the 30L container, or rolling base, page of the Milwaukee service parts list for the 8960-20 8 Gallon Dust Extractor, serial J08A, bulletin 54-05-8960, where it is called out as a quantity of two. It works together with the wheel axle (42-12-0310), the rear wheels (45-94-0507), and the wheel caps (42-52-0180), all of which are sold separately; if you are servicing the wheels, inspect and replace these parts together and order both clamping rings so the pair matches. Because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering, since running production changes can alter part compatibility within the same catalog number.
Features
- Genuine Milwaukee OEM clamping ring
- For the 8960-20 8 Gallon Dust Extractor
- Figure 7 on the 30L container (rolling base) page of the service parts diagram
- Retains a rear wheel on the wheel axle of the rolling base
- Holds the wheel in position so it turns freely without working loose
- The extractor uses two, one at each rear wheel
- Paired with the wheel axle, rear wheels, and wheel caps
- Correct clamp force and groove fit to hold the wheel securely
- Prevents wheel play or a wheel coming off during transport
- Sold individually; order two to do the pair of rear wheels
- Bulletin 54-05-8960 (SER J08A)
- Replace both rings when servicing the wheels
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 34-80-2985
- Official Description: Clamping Ring
- Component Type: Wheel axle clamping / retaining ring
- Primary Fitment: Milwaukee 8960-20 8 Gallon Dust Extractor, SER J08A
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Figure 7, 30L container (rolling base) page (bulletin 54-05-8960)
- Quantity: Sold individually; the 8960-20 uses two (one per rear wheel)
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Clamping Ring
The wheel axle (42-12-0310), rear wheels (45-94-0507), and wheel caps (42-52-0180) are NOT included and are sold separately. The 8960-20 uses two clamping rings, so order two to service both rear wheels. Always verify by serial number using Milwaukee's online parts lookup before ordering, since fitment can vary by production revision within the same catalog number.
