Product Description
**Milwaukee parts change not only by model# but also by serial number. Milwaukee's site lets you look up your tool's parts diagram. Enter Cat# and Select Service Parts. Also match Serial Number.
Milwaukee Retaining Ring
Model Number: 34-60-0003
The Milwaukee 34-60-0003 is a genuine OEM Retaining Ring for the 2787-20 and 2788-20 M18 FUEL 1-1/2 in. Mag Drills. A retaining ring, also called a snap ring or circlip, is a precision spring-steel ring that seats into a machined groove on a shaft or inside a bore to create a removable shoulder that holds a component, such as a bearing, gear, or bushing, in its correct axial position. On the heavy-duty magnetic drill the ring keeps its component located under the loads of drilling, where the drivetrain and spindle run under high torque and feed force. A sprung, deformed, or missing retaining ring can no longer hold its component in place, which lets parts shift or work loose and can lead to further damage. Replacing it with the genuine Milwaukee OEM ring restores correct retention and the proper diameter, thickness, and spring rate for the groove, where an off-spec ring may not seat or hold under load.
This retaining ring is cataloged for the 2787-20 and 2788-20 M18 FUEL Mag Drills, including the 2787-059 service version, on the Milwaukee service parts list for these tools. Retaining rings are sized hardware that can appear in more than one place on a tool and across different tools, so verify by serial number and the service parts diagram that 34-60-0003 is the correct ring for the exact location and model you are servicing, since a similar-looking ring of a different size will not hold correctly. It is a single-piece spring-steel ring, and it is installed into its groove with retaining ring pliers. Because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering, since running production changes can alter part compatibility within the same catalog number.
Features
- Genuine Milwaukee OEM retaining ring
- For the 2787-20 and 2788-20 M18 FUEL mag drills (and 2787-059)
- A spring-steel snap ring (circlip) that seats in a machined groove
- Holds a bearing, gear, bushing, or shaft in its correct axial position
- Keeps its component located under drilling loads and torque
- Restores correct retention and the proper spring-steel fit
- Replace if the ring is sprung, deformed, or missing
- Sized hardware: verify the exact location and ring by serial and diagram
- Installed into its groove with retaining ring pliers
- Sold individually
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 34-60-0003
- Official Description: Retaining Ring
- Component Type: Spring-steel retaining ring (snap ring / circlip)
- Primary Fitment: Milwaukee 2787-20 and 2788-20 M18 FUEL Mag Drills (and 2787-059)
- Also Referenced On: Retaining rings can appear on multiple tools and locations; verify by serial number and the service parts diagram using Milwaukee's online parts lookup
- Parts Diagram Position: Verify figure on the Milwaukee service parts diagram for your model and serial
- Quantity: Sold individually (1 ring)
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Retaining Ring
Always verify by serial number and the service parts diagram that this is the correct ring for your tool and location before ordering, using Milwaukee's online parts lookup.
