Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Slide Pole
Model Number: 31-92-0226
The Milwaukee 31-92-0226 is a genuine OEM Slide Pole, an internal linkage component of the slide-switch mechanism used on Milwaukee slide-switch tools such as angle grinders. On a tool with a slide switch, the operator pushes a slide switch button to turn the tool on and off, and the slide pole is the connecting part that links that button to the electrical switch: as the button slides, the pole transfers the motion to actuate the switch. It is a small but important component of the switch mechanism, and it must move freely and locate correctly so the slide switch operates smoothly and reliably. When the slide pole is broken, worn, or missing, the slide switch can become difficult to operate, feel loose or disconnected, or fail to turn the tool on or off properly. Replacing it with the correct genuine Milwaukee OEM slide pole restores proper, reliable slide-switch operation.
Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, and because slide poles are specific to the tool and switch mechanism they serve, always verify your tool's serial number against the official Milwaukee service parts diagram before ordering to confirm this is the correct slide pole for your tool. Do not order by appearance, since slide poles that look similar can differ in length and detail, and the diagram is what confirms the correct part. A screwdriver is typically needed to open the tool to access and replace the slide pole. The slide switch button, electrical switch, and related switch components that work with the slide pole are separate parts that vary by tool, so refer to your tool's parts diagram for the correct companion part numbers, and inspect the switch and button when replacing the pole since these parts work together.
Features
- Genuine Milwaukee OEM service part, not an aftermarket substitute
- Slide Pole, part of the slide-switch mechanism
- Links the slide switch button to the electrical switch
- Transfers the button's motion to actuate the switch on and off
- For Milwaukee slide-switch tools such as angle grinders
- Restores smooth, reliable slide-switch operation
- Corrects a slide switch that is loose, difficult, or fails to actuate
- Must move freely and locate correctly for proper switch function
- Manufactured to Milwaukee specification for correct fit and movement
- A screwdriver is typically needed to access and replace the pole
- Slide switch button and electrical switch are separate parts, sold separately
- Verify catalog number and serial number before ordering
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 31-92-0226
- Official Description: Slide Pole
- Component Type: Slide-switch linkage pole
- Function: Links the slide switch button to the electrical switch
- Primary Fitment: Milwaukee slide-switch tools such as angle grinders - verify by model and serial number
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Verify the figure and bulletin number on Milwaukee's online parts lookup
- Quantity: Sold individually, (1) required per tool
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Milwaukee 31-92-0226 Slide Pole
The slide switch button, electrical switch, and related switch components that work with the slide pole are NOT included, vary by tool, and are sold separately - refer to your tool's parts diagram for the correct part numbers and quantities. Always verify by serial number using Milwaukee's online parts lookup before ordering.
