Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Vacuum Attachment
Model Number: 31-03-5002
The Milwaukee 31-03-5002 is a genuine OEM Vacuum Attachment, also called the Dust Collection Attachment in Milwaukee's operator's manual, for the M18 FUEL barrel grip jig saw. It is the molded port that clips onto the back of the saw and routes sawdust and chips away from the cut line and into a connected vacuum or dust extractor, keeping the work surface and cut line clear for cleaner, more accurate cuts and reducing airborne dust. The saw also has an on/off cut-line blower, and Milwaukee's instructions are to switch the blower off when running dust extraction so the attachment can draw the debris away. Using the genuine OEM attachment ensures it seats correctly against the curved area at the rear of the tool and holds securely during use, where an ill-fitting attachment can leak dust or fall off.
This attachment is identified as the Vacuum Attachment, Figure 75, on the Milwaukee service parts list for the 2737B-20 barrel grip jig saw, bulletin 54-40-2805. It is specific to the barrel grip saw: the D-handle 2737-20 uses a different vacuum attachment, part number 31-03-5001, so match the part to your grip style and do not cross-order between the two saws. Note a fitment constraint called out in Milwaukee's operator's manual: on the 2737B-20, the dust collection attachment cannot be used with larger battery packs, because a larger pack interferes with the attachment at the rear of the tool, so confirm the compatible battery sizes in the manual for your saw. To install, line up the small end of the attachment with the curved area at the back of the saw; to remove, pull the attachment away from the saw. Because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering, since running production changes can alter part compatibility within the same catalog number.
Features
- Genuine Milwaukee OEM vacuum attachment (dust collection attachment)
- For the M18 FUEL barrel grip jig saw
- Fits the 2737B-20 (SER J71A), Figure 75, bulletin 54-40-2805
- Routes sawdust and chips into a connected vacuum or dust extractor
- Keeps the cut line and work surface clear for cleaner, more accurate cuts
- Reduces airborne dust at the cut
- Clips onto the curved area at the rear of the saw and pulls off for removal
- Used with the cut-line blower switched off for effective extraction
- Specific to the barrel grip saw; the D-handle 2737-20 uses the separate 31-03-5001
- Cannot be used with larger battery packs on the 2737B-20 per Milwaukee's manual; verify compatible battery sizes
- Correct OEM fit for a secure hold and a good dust seal
- Sold individually
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 31-03-5002
- Official Description: Vacuum Attachment (Dust Collection Attachment)
- Component Type: Jig saw dust extraction / vacuum attachment
- Primary Fitment: Milwaukee 2737B-20 M18 FUEL Jig Saw (Barrel Grip), SER J71A
- Also Referenced On: The D-handle Milwaukee 2737-20 uses the separate Vacuum Attachment 31-03-5001; do not cross-order between the two saws
- Parts Diagram Position: Figure 75 (bulletin 54-40-2805)
- Quantity: Sold individually (1 attachment)
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Vacuum Attachment (Dust Collection Attachment)
The vacuum or dust extractor and its hose are NOT included; the attachment connects the saw to your own extraction equipment. Always verify by serial number using Milwaukee's online parts lookup before ordering, and confirm your attachment matches your grip style, since the barrel grip (31-03-5002) and D-handle (31-03-5001) saws use different attachments.
