Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Dust Port
Model Number: 31-03-0046
The Milwaukee 31-03-0046 is a genuine OEM Dust Port, the molded fitting on a tool that channels dust and debris out of the cutting or sanding area and provides the connection point for dust collection. In use, the dust port routes the dust the tool generates to a port where it can be captured, either into an onboard dust bag or box or through a hose connected to a vacuum or dust extractor. Keeping dust collected at the source keeps the work area cleaner, improves visibility of the cut or work line, and supports dust and silica compliance, but only if the dust port is intact and connects properly. Because the port sits in the debris path and takes the knocks of hose connections and jobsite handling, it can crack, break, or wear at the connection, at which point dust escapes and a hose or bag no longer seats securely. Replacing it with the correct genuine Milwaukee OEM dust port restores proper dust routing and a secure connection, because the part is molded to fit both the tool and the matching hose or dust collection accessory.
Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee service parts diagram before placing your order, since running production changes can alter part compatibility within the same catalog number, and confirm this dust port at its figure position on your tool's current service parts list. Dust ports are specific to the tool they serve, so match this part to your tool using Milwaukee's online parts lookup rather than by appearance. The vacuum hose, dust bag or box, and any adapter or gasket that work with the dust port are separate parts that vary by tool, so refer to your tool's parts diagram for the correct companion part numbers and quantities.
Features
- Genuine Milwaukee OEM service part, not an aftermarket substitute
- Dust port that channels dust out of the tool for collection
- Provides the connection point for a dust bag, box, hose, or vacuum
- Keeps dust collected at the source for a cleaner, clearer work area
- Supports dust and silica compliance when connected to extraction
- Molded to fit both the tool and the matching dust collection accessory
- Restores proper dust routing and a secure hose or bag connection
- Direct-fit replacement for a cracked, broken, or worn dust port
- Manufactured to Milwaukee specification for correct fit
- Specific to the tool it serves, so verify fitment on the diagram
- Companion hose, bag, and adapters vary by tool and are sold separately
- Verify catalog number and serial number before ordering
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 31-03-0046
- Official Description: Dust Port
- Component Type: Dust collection port fitting
- Primary Fitment: Verify by catalog and serial number on the parts diagram
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Verify the figure and bulletin number on Milwaukee's online parts lookup
- Quantity: Sold individually, (1) required per tool
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Milwaukee 31-03-0046 Dust Port
