Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Switch
Model Number: 23-66-0014
The Milwaukee 23-66-0014 is a genuine OEM Switch for the 2736-20 M18 FUEL 8-1/4 in. Table Saw. It is the on-off power switch in the saw's switch panel, the control the operator uses to start and stop the table saw, and it carries the saw's motor power through the switching contacts. It mounts in the switch panel assembly at the front of the saw and works together with the switch panel and the switch panel magnet. As the main power control, it is actuated every time the saw is used and carries the motor's starting and running current, so over time the contacts or actuator can wear and the switch can become intermittent or fail to start or stop the saw reliably. Replacing it with the genuine Milwaukee OEM switch restores the correct current rating, actuator geometry, and wiring interface for the table saw, where an off-spec switch may not fit the panel, actuate correctly, or handle the motor current.
This switch is identified as the Switch, Figure 184, on the Milwaukee service parts lists for the 2736-20 M18 FUEL 8-1/4 in. Table Saw with ONE-KEY, serial J35A, bulletins 54-00-2736 and 54-40-2760R, and it also serves the 2736-21 and 2736-21HD kit versions of the saw. It works with the switch panel, part number 23-35-0010, the table saw switch panel magnet, part number 23-27-0010, and the pin, part number 44-60-0091, which are separate items. When replacing the switch, note the wire routing and connections while dismantling and match them on reassembly. Because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering, since running production changes can alter part compatibility within the same catalog number.
Features
- Genuine Milwaukee OEM switch
- For the 2736-20 M18 FUEL 8-1/4 in. Table Saw
- On-off power switch in the saw's switch panel
- The control used to start and stop the table saw
- Carries the saw's motor power through the switching contacts
- Figure 184 on the service parts diagram (bulletins 54-00-2736 and 54-40-2760R, SER J35A)
- Also serves the 2736-21 and 2736-21HD kit versions
- Works with the switch panel (23-35-0010) and switch panel magnet (23-27-0010)
- Restores reliable starting and stopping when the original switch is worn or intermittent
- Correct current rating, actuator geometry, and wiring interface
- Note wire routing and connections during replacement
- Sold individually
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 23-66-0014
- Official Description: Switch
- Component Type: Table saw on-off power switch
- Primary Fitment: Milwaukee 2736-20 M18 FUEL 8-1/4 in. Table Saw with ONE-KEY (SER J35A); also 2736-21 and 2736-21HD
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Figure 184 (bulletins 54-00-2736 and 54-40-2760R)
- Quantity: Sold individually (1 switch)
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Switch
The switch panel (23-35-0010), the switch panel magnet (23-27-0010), the pin (44-60-0091), and the saw are NOT included and are sold separately. Always verify by serial number using Milwaukee's online parts lookup before ordering, since fitment can vary by production revision within the same catalog number.
