Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Cordset
Model Number: 22-64-1231
The Milwaukee 22-64-1231 Cordset is a genuine OEM replacement power cord designed for use across multiple older Milwaukee corded compact drill platforms, with confirmed compatibility on the Milwaukee 1660-6 (serial code 719B) 1/2 in. Reversing Compact Drill. This part replaces obsolete part number 22-64-1230, so if you have ordered the 22-64-1230 in the past, the 22-64-1231 is the current Milwaukee-issued replacement and is the correct part to order going forward. The cordset is a complete power cord assembly with a standard three-prong plug, providing AC electrical power from the wall outlet to the tool's internal switch and motor. As a heavier-duty cord weighing 0.87 lb, the 22-64-1231 is constructed with the conductor gauge, insulation thickness, and strain-relief geometry that the compact drill platforms it serves were originally designed around, ensuring correct current capacity and durable service life under typical jobsite use.
A frayed, cut, cracked, abraded, pinched, or damaged power cord on a corded drill is a serious electrical safety hazard and must be replaced before the tool is used again. Replacing the cordset with this OEM service part restores the correct conductor capacity, insulation integrity, and electrical safety chain the tool was designed around. Replacement typically requires a screwdriver and pliers to access the tool handle, disconnect the existing cord from the switch and ground terminal, and reconnect the new cord at the same terminals. Substituting a generic extension cord, replacement cord from a different tool, or aftermarket cord at this location compromises the electrical safety the original tool design was certified around. Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee service parts diagram before ordering, since the 22-64-1231 fits multiple older Milwaukee compact drill platforms and the exact serial-code range varies. When replacing the cordset, Milwaukee recommends inspecting the cord strain relief (Milwaukee 44-76-0150) at the same time, since the strain relief is the primary mechanical protection that prevents premature cord failure at the housing exit and is sold separately. Verify by serial number using Milwaukee's online parts lookup before ordering to confirm correct fitment.
Features
- Genuine Milwaukee OEM replacement, current factory part for the 22-64-1231 reference
- Replaces obsolete part number 22-64-1230, the current Milwaukee-issued replacement
- Confirmed compatibility on the Milwaukee 1660-6 (719B) 1/2 in. Reversing Compact Drill
- Compatible with multiple older Milwaukee corded compact drill platforms when verified by serial number
- Complete power cord assembly with three-prong plug for standard 120V AC outlets
- Constructed to Milwaukee's factory conductor gauge and insulation specifications
- Correct strain-relief geometry for the compact drill platforms it serves
- Critical electrical safety component, replacement is required at any sign of cord damage
- Manufactured to Milwaukee factory tolerances and certification standards
- Direct-fit replacement with installation typically requiring only a screwdriver and pliers
- Companion part: Milwaukee 44-76-0150 Cord-Strain Relief, sold separately
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 22-64-1231
- Replaces Obsolete Part: 22-64-1230
- Official Description: Cordset
- Component Type: Complete Power Cord Assembly with Three-Prong Plug
- Confirmed Compatible Model: Milwaukee 1660-6 (SER 719B) 1/2 in. Reversing Compact Drill
- Additional Fitment: Compatible with several older Milwaukee corded compact drill platforms (verify by serial number)
- Part Weight: 0.87 lb
- Quantity: Sold individually, 1 cordset per order
- Part Type: OEM Service Replacement Part
Includes
- (1) Milwaukee 22-64-1231 Cordset
- Note: Cord-Strain Relief (Milwaukee 44-76-0150) is NOT included and sold separately. Recommended for inspection at the same time as cord replacement
- Note: Verify your tool's catalog number and serial number against the official Milwaukee parts diagram before ordering
