Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Ejector Spring Kit
Model Number: 14-46-2787
The Milwaukee 14-46-2787 is a genuine OEM Ejector Spring Kit for the 2787 M18 FUEL Magnetic Drill and the 4274 Electromagnetic Drill Press. On a magnetic drill running annular cutters, the ejector spring is the spring that surrounds the arbor's ejector pin and drives it: when the cut is complete, the spring pushes the ejector pin down to eject the slug, or core, that an annular cutter leaves behind, clearing the cut so the tool is ready for the next hole. It also helps return the pin and keep the cutter system working smoothly through repeated cuts. Supplied as a kit, this part provides the ejector spring along with the associated small components needed for the service, so the ejector mechanism goes back together correctly. Because the spring is loaded and cycled on every cut, it is a wear item: over time it can weaken, take a set, or break, at which point the slug may not eject reliably and the cutting cycle is interrupted. Replacing it with the correct genuine Milwaukee OEM kit restores proper slug ejection and smooth annular cutter operation.
Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee service parts diagram before placing your order, since running production changes can alter part compatibility within the same catalog number. This ejector spring kit is used on both the 2787 M18 FUEL Magnetic Drill and the 4274 Electromagnetic Drill Press, so confirm your tool's catalog and serial number against the parts diagram before ordering. The ejector pin, arbor, and cutting components that work with the ejector spring are separate parts that vary by tool and setup, so refer to your tool's parts diagram for the correct companion part numbers and quantities, and inspect the ejector pin and arbor when servicing the spring since these parts work together.
Features
- Genuine Milwaukee OEM service part, not an aftermarket substitute
- Ejector Spring Kit for the 2787 M18 FUEL and 4274 Magnetic Drills
- Drives the ejector pin that pushes out the annular cutter slug
- Clears the core after each cut so the tool is ready for the next hole
- Helps return the pin and keep the cutter system working smoothly
- Supplied as a kit with the ejector spring and associated components
- Restores reliable slug ejection when the original spring weakens or breaks
- A loaded wear item cycled on every cut
- Manufactured to Milwaukee specification for the correct force and fit
- Inspect the ejector pin and arbor when servicing the spring
- Ejector pin and cutting components vary by setup and are sold separately
- Verify catalog number and serial number before ordering
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 14-46-2787
- Official Description: Ejector Spring Kit
- Component Type: Annular cutter ejector spring service kit
- Function: Drives the ejector pin to eject the cutter slug
- Primary Fitment: 2787 M18 FUEL Magnetic Drill and 4274 Electromagnetic Drill Press
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Verify the figure and bulletin number on Milwaukee's online parts lookup
- Quantity: Sold as a kit, (1) required per tool
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Milwaukee 14-46-2787 Ejector Spring Kit
The ejector pin, arbor, and annular cutting components that work with the ejector spring are NOT included, vary by setup, and are sold separately - refer to your tool's parts diagram for the correct part numbers and quantities. Always verify by serial number using Milwaukee's online parts lookup before ordering.
