Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee D25 Flex Skid Service Kit
Model Number: 14-46-0609
The Milwaukee 14-46-0609 is a genuine OEM D25 Flex Skid Service Kit for the 3972-20 M18 100 ft. Flexible Modular Pipeline Inspection Reel. On a pipeline inspection camera, a skid is the guide that fits over the camera head to center it within the pipe as the push cable feeds it down the line. The skid holds the camera head off the bottom and walls of the pipe so the lens stays centered for a clear, properly oriented image, and it helps the head glide smoothly through the line and navigate bends and traps rather than snagging or dragging. This is the D25 flex skid, the flexible skid matched to the reel's 25 mm HDR self-leveling camera head, and its flexibility is what lets it follow the push cable through the tight bends and traps of the 1.5 in. to 4 in. drain lines this reel is designed to inspect. Because the skid is in constant contact with the inside of the pipe and takes the abrasion of every run, it is a wear item, and the reel ships with barrel skids for exactly this reason. Replacing a worn, cracked, or lost skid with the correct genuine Milwaukee OEM kit restores a centered camera head, clear imaging, and smooth travel through the line.
Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee service parts diagram before placing your order, since running production changes can alter part compatibility within the same catalog number. This skid service kit is specified for the 3972-20 M18 Flexible Pipeline Inspection Reel with its 25 mm camera head, so confirm your tool's catalog and serial number against the parts diagram before ordering, and make sure the skid matches your camera head size. The camera head, push cable, reel, and the M18 500 GB Control Hub that runs the system are separate parts, so refer to your tool's parts diagram for the correct companion part numbers and quantities.
Features
- Genuine Milwaukee OEM service part, not an aftermarket substitute
- D25 Flex Skid Service Kit for the 3972-20 M18 Flexible Pipeline Inspection Reel
- Skid that fits over the camera head to center it within the pipe
- Holds the lens off the pipe walls for a clear, centered image
- Helps the camera head glide smoothly and navigate bends and traps
- Flexible design follows the push cable through tight bends in 1.5 in. to 4 in. lines
- Matched to the reel's 25 mm HDR self-leveling camera head
- A wear item in constant contact with the inside of the pipe
- Restores a centered head, clear imaging, and smooth travel when worn or lost
- Manufactured to Milwaukee specification for correct fit on the camera head
- Camera head, push cable, reel, and Control Hub are separate, sold separately
- Verify catalog number and serial number before ordering
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 14-46-0609
- Official Description: D25 Flex Skid Service Kit
- Component Type: Pipeline inspection camera head skid
- Camera Head Size: 25 mm (D25)
- Function: Centers and guides the camera head through the pipe
- Primary Fitment: 3972-20 M18 100 ft. Flexible Modular Pipeline Inspection Reel
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Verify the figure and bulletin number on Milwaukee's online parts lookup
- Quantity: Sold as a kit, verify quantity on the parts diagram
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Milwaukee 14-46-0609 D25 Flex Skid Service Kit, as supplied by Milwaukee
The camera head, push cable, reel, and M18 500 GB Control Hub are NOT included, vary by tool, and are sold separately - refer to your tool's parts diagram for the correct part numbers and quantities. Always verify by serial number using Milwaukee's online parts lookup before ordering.
