Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Nozzle Holder Kit
Model Number: 14-46-0601
The Milwaukee 14-46-0601 is a genuine OEM Nozzle Holder Kit for the 0887-20 M18 Brushless Precision Blower. This is the nozzle holder on the tool itself, the front-end mount at the blower's outlet that the interchangeable nozzles connect to: the 6mm nozzle, the 10mm nozzle, and the inflator nozzle each lock onto this holder with the blower's quarter-turn system so the airflow is directed through the selected tip. It is supplied as a kit containing the nozzle holder and two mounting screws, and it fastens to the motor barrel of the blower. If the holder is cracked, worn, or will no longer lock a nozzle securely, the nozzles can loosen, leak air, or fail to stay seated, so replacing the holder restores a secure nozzle connection and proper airflow. Using the genuine Milwaukee OEM kit ensures the correct mount geometry and quarter-turn interface, where an off-spec part may not seat or lock the nozzles correctly.
This kit is identified as the Nozzle Holder Kit, Figure 56, on the Milwaukee service parts list for the 0887-20 M18 Brushless Precision Blower, serial R63A, bulletin PN0006762. It is the nozzle holder (Figure 20 on the diagram) and it mounts to the motor barrel at a seating torque of about 3.9 in-lbs. Note that this is a different part from the Nozzle Storage Assembly (14-52-0001), which is the separate magnetic caddy that stores the spare nozzles, and from the nozzles themselves, the inflation nozzle (31-01-0056), 6mm nozzle (31-01-0057), and 10mm nozzle (31-01-0058), which are sold separately. Because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering, since running production changes can alter part compatibility within the same catalog number.
Features
- Genuine Milwaukee OEM nozzle holder kit
- For the 0887-20 M18 Brushless Precision Blower
- The on-tool nozzle mount that the interchangeable nozzles connect to
- The 6mm, 10mm, and inflator nozzles quarter-turn onto this holder
- Directs the blower's airflow through the selected nozzle
- Figure 56 on the service parts diagram (bulletin PN0006762, SER R63A)
- Kit includes the nozzle holder and two mounting screws
- Fastens to the motor barrel (seating torque about 3.9 in-lbs)
- Restores a secure nozzle connection and proper airflow when the holder is worn or cracked
- Different from the Nozzle Storage Assembly (14-52-0001), the magnetic storage caddy
- Correct OEM mount geometry and quarter-turn interface
- Sold as one kit
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 14-46-0601
- Official Description: Nozzle Holder Kit
- Component Type: Blower nozzle holder / on-tool nozzle mount (service kit)
- Primary Fitment: Milwaukee 0887-20 M18 Brushless Precision Blower, SER R63A
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Figure 56 (bulletin PN0006762); the nozzle holder is Figure 20 on the diagram
- Quantity: Sold as one kit (1)
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Nozzle Holder
- (2) Screws
The interchangeable nozzles, the inflation nozzle (31-01-0056), 6mm nozzle (31-01-0057), and 10mm nozzle (31-01-0058), and the Nozzle Storage Assembly (14-52-0001) are NOT included and are sold separately. Always verify by serial number using Milwaukee's online parts lookup before ordering, since fitment can vary by production revision within the same catalog number.
