Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Leg Support Kit
Model Number: 14-46-0179
The Milwaukee 14-46-0179 is a genuine OEM Leg Support Kit for the 2136-20 M18 ROCKET Tower Light. This kit supplies a single fold-out support leg for the light's base along with its linkage and pivot hardware, everything needed to replace one leg. The kit includes one leg, one wire leg linkage, and one leg support pin. The leg is the fold-out support that extends from the base to give the tall, telescoping mast a wide, stable footprint so the light stands securely and resists tipping when raised to full height. The wire leg linkage is the strut that holds the leg at the correct deployed angle, and the leg support pin is the pivot the leg folds on and mounts to the base with. Together these three pieces make up one complete leg of the base support system. Because the leg is folded out and in for every setup and takedown and takes the handling and knocks of jobsite use, it and its linkage and pin can bend, crack, or wear: a damaged leg, a failed linkage, or a worn pin leaves the base less stable or a leg that will not fold and lock correctly. Replacing them with this correct genuine Milwaukee OEM kit restores a stable, secure leg for the tower light.
Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee service parts diagram before placing your order, since running production changes can alter part compatibility within the same catalog number. This leg support kit is specified for the 2136-20 M18 ROCKET Tower Light, so confirm your tool's catalog and serial number against the parts diagram before ordering. Note that this kit replaces one leg; the tower light base stands on more than one support leg, so if more than one leg is damaged, order the quantity your repair requires. The base casting the leg mounts to and other base and mast components are separate parts that transfer from your existing light, so refer to your tool's parts diagram for the correct companion part numbers. Because a stable base is essential to safe operation of a tower light raised overhead, inspect the base and mounting points when installing the leg and be sure it folds out, locks, and supports the light correctly before use.
Features
- Genuine Milwaukee OEM service part, not an aftermarket substitute
- Leg Support Kit for the 2136-20 M18 ROCKET Tower Light
- Replaces one complete fold-out base support leg
- Includes one leg, one wire leg linkage, and one leg support pin
- The leg folds out to give the mast a wide, stable footprint
- The wire leg linkage holds the leg at the correct deployed angle
- The leg support pin is the pivot the leg folds on and mounts with
- The three pieces make up one complete leg of the base support system
- Restores a stable, secure leg when the original is bent, cracked, or worn
- Helps the light stand securely and resist tipping at full height
- Replaces one leg; order the quantity your repair requires
- Verify catalog number and serial number before ordering
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 14-46-0179
- Official Description: Leg Support Kit
- Component Type: Tower light base support leg kit
- Kit Contents: 1 leg, 1 wire leg linkage, 1 leg support pin
- Function: Replaces one fold-out base support leg
- Primary Fitment: 2136-20 M18 ROCKET Tower Light
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Verify the figure and bulletin number on Milwaukee's online parts lookup
- Quantity: Sold as a kit that replaces one leg
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Leg
- (1) Wire Leg Linkage
- (1) Leg Support Pin