Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Gearcase Cover Kit - Left Half
Model Number: 14-30-1051
The Milwaukee 14-30-1051 is a genuine OEM Gearcase Cover Kit for the left half of the gearcase on the 2625-20 M18 HACKZALL reciprocating saw. On this saw the gearcase is built in two halves, a left and a right, that bolt together to enclose the gear train that converts the motor's rotation into the reciprocating stroke of the blade. This kit covers the left side and is supplied as a complete service kit: it includes the left gearcase cover, the spiral bevel gear, a ball bearing, the bearing plate and its screws, and aluminum tape, so you have the gearcase half along with the gear and bearing components needed to rebuild that side. The gearcase and its gear and bearing carry the full working load of the drivetrain, and under hard use they wear. A worn spiral bevel gear, a failed ball bearing, or a cracked gearcase cover shows up as noise, vibration, lost cutting power, or a drivetrain that binds. Replacing the worn left half with this correct genuine Milwaukee OEM kit restores proper, quiet, full-power gear drive on that side of the gearcase.
Important: the 2625-20 M18 HACKZALL was produced in several revisions over its production run, and the internal parts, including the gearcase, changed between revisions. This gearcase kit fits only specific serial number ranges of the 2625-20, not every 2625-20, so it is essential to verify your tool's serial number against the official Milwaukee service parts diagram before ordering. Do not order by the catalog number alone: confirm this exact part appears on the parts diagram for your tool's specific serial number, because a kit from a different revision will not fit or function correctly. Milwaukee specifies these parts by both catalog number and serial number for exactly this reason. This gearcase kit is the left half and is designed to be assembled with the matching right gearcase kit, so note that the right gearcase kit, the motor assembly, and the blade clamp are separate parts documented on the same diagram. Because replacing a gearcase half involves opening the drivetrain, follow the correct Milwaukee service procedure and re-grease the gear and bearing with the Milwaukee-specified grease on reassembly, and inspect the matching right gearcase half and the gear it meshes with when servicing this side.
Features
- Genuine Milwaukee OEM service part, not an aftermarket substitute
- Gearcase Cover Kit for the left half of the gearcase
- For the 2625-20 M18 HACKZALL reciprocating saw
- Fits specific serial number ranges only, not every 2625-20
- One half of a two-piece, left-and-right gearcase
- Supplied as a complete kit for rebuilding the left side
- Includes the left gearcase cover and the spiral bevel gear
- Includes a ball bearing, the bearing plate, and bearing plate screws
- Includes aluminum tape
- Restores proper, quiet, full-power gear drive when the half is worn
- Designed to assemble with the matching right gearcase kit
- Verify your serial number against the parts diagram before ordering
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 14-30-1051
- Official Description: Gearcase Cover Kit - Left Halve
- Component Type: Reciprocating saw gearcase half (left) kit
- Includes: Spiral bevel gear, bearing plate screws, bearing plate, ball bearing, left gearcase cover, aluminum tape
- Primary Fitment: 2625-20 M18 HACKZALL - specific serial number ranges only
- Fitment Note: The 2625-20 had multiple production revisions; this kit fits only certain serial numbers, so verify your serial number on the parts diagram
- Pairs With: Matching right gearcase kit
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Verify the figure and bulletin number on Milwaukee's online parts lookup
- Quantity: Sold as a kit, (1) left half per tool
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Spiral Bevel Gear
- (1) Bearing Plate
- Bearing Plate Screws
- (1) Ball Bearing
- (1) Gearcase Cover - Left Half
- Aluminum Tape
The matching right gearcase kit, the motor assembly, the blade clamp, and other drivetrain components that work with this gearcase half are NOT included, vary by tool, and are sold separately - refer to your tool's parts diagram for the correct part numbers and quantities. Always verify by serial number using Milwaukee's online parts lookup before ordering, since this kit fits only specific serial number ranges of the 2625-20.
