Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Assembled Anti-Kickback
Model Number: 14-02-0005
The Milwaukee 14-02-0005 is a genuine OEM Assembled Anti-Kickback unit for the 2736-20 M18 FUEL 8-1/4 in. Table Saw. This is the saw's mechanical anti-kickback pawl assembly, supplied as the pawls together with their associated mounting and spring hardware. Anti-kickback pawls are a critical table saw safety device: the spring-loaded, serrated pawls ride on top of the workpiece as it is fed through the blade, and their teeth are angled so the wood can move forward freely during a normal cut but bite in and grip the wood if it tries to travel backward. That grip stops the board from being caught by the blade and hurled back toward the operator, which is exactly what happens in a kickback, one of the most dangerous events on a table saw. The assembly is part of the saw's modular blade guard and riving knife system, mounting with the guard and spreader behind the blade. Because the pawls grip wood with their teeth and rely on their springs to return and bite, and both the teeth and springs wear with use, a worn, damaged, or broken anti-kickback assembly no longer provides reliable kickback protection and should be replaced to restore that safety function.
Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee service parts diagram before placing your order, since running production changes can alter part compatibility within the same catalog number. This anti-kickback assembly is specified for the 2736-20 M18 FUEL 8-1/4 in. Table Saw, so confirm your tool's catalog and serial number against the parts diagram before ordering. The riving knife or spreader, the blade guard assembly, and the mounting hardware that work with the anti-kickback pawls are separate parts that vary by tool, so refer to your tool's parts diagram for the correct companion part numbers, and inspect the guard and riving knife when servicing the anti-kickback assembly since these parts work together as the saw's guarding system. After installing, confirm the pawls pivot freely and their springs return them firmly so they grip on reverse motion, and keep the complete blade guard and riving knife system installed for safe operation.
Features
- Genuine Milwaukee OEM service part, not an aftermarket substitute
- Assembled Anti-Kickback pawl assembly for the 2736-20 M18 FUEL 8-1/4 in. Table Saw
- Mechanical anti-kickback device, no sensors or electronics
- Spring-loaded, serrated pawls that grip the workpiece
- Allow forward feed but bite in and grip if the wood travels backward
- Help prevent kickback, a dangerous table saw event
- Supplied as the pawls with their mounting and spring hardware
- Part of the saw's modular blade guard and riving knife safety system
- Restores reliable kickback protection when worn or damaged
- Manufactured to Milwaukee specification for correct fit and function
- Riving knife, blade guard, and hardware are separate parts, sold separately
- Verify catalog number and serial number before ordering
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 14-02-0005
- Official Description: Assembled Anti-Kickback
- Component Type: Mechanical anti-kickback pawl assembly
- Function: Serrated pawls grip the workpiece to prevent kickback
- Primary Fitment: 2736-20 M18 FUEL 8-1/4 in. Table Saw
- Part of: Modular blade guard and riving knife system
- Also Referenced On: Verify additional applications using Milwaukee's online parts lookup
- Parts Diagram Position: Verify the figure and bulletin number on Milwaukee's online parts lookup
- Quantity: Sold as an assembly, (1) required per tool
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Milwaukee 14-02-0005 Assembled Anti-Kickback (anti-kickback pawls and associated hardware)
The riving knife or spreader, the blade guard assembly, and the mounting hardware that work with the anti-kickback pawls are NOT included, vary by tool, and are sold separately - refer to your tool's parts diagram for the correct part numbers and quantities. Always verify by serial number using Milwaukee's online parts lookup before ordering.
