Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee M4 x 20mm Pan Head T-10 Screw with Washer
Model Number: 06-82-7337
The Milwaukee 06-82-7337 is a genuine OEM M4 x 20mm pan head T-10 screw with a captive washer, a gearbox fastener used in many Milwaukee drills, drivers, and hammer drills. It is a self-tapping, or thread-forming, screw with a T-10 Torx drive and an integral washer that stays on the screw, spreading the clamping load across the housing and helping the joint hold. It is most often used to secure the gearbox, or gearcase service assembly, to the tool, where several of these screws clamp the gearbox in place; Milwaukee specifies a seating torque of roughly 8 to 10 in-lbs for this fastener. One distinction to watch: Milwaukee also makes a same-size M4 x 20mm T-10 screw without the captive washer, part number 06-82-7336, so order this with-washer version by its exact part number. Using the genuine Milwaukee OEM screw ensures the correct thread, length, head, drive, washer, and grade for the joint, where a mismatched screw can strip, fail to form threads correctly, or not clamp the gearbox securely.
This screw is a common Milwaukee gearbox fastener rather than a part unique to one tool: it is used across many Milwaukee drills, drivers, and hammer drills, including M18 compact and mid-range brushless hammer drills such as the 2902-20 and the 2904 series, typically as a quantity of four in the gearbox service assembly. Milwaukee's application list for a shared fastener like this is not intended to be complete, so confirm the figure position and the quantity required on your specific tool's service parts diagram, and tighten to the specified torque. Because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering, since running production changes can alter part compatibility within the same catalog number.
Features
- Genuine Milwaukee OEM pan head T-10 screw with captive washer
- M4 x 20mm, self-tapping (thread-forming), T-10 Torx drive
- Integral washer spreads the clamping load and stays with the screw
- Gearbox, or gearcase service assembly, fastener
- Used across many Milwaukee drills, drivers, and hammer drills
- Typically used as a quantity of four per gearbox
- Seating torque about 8 to 10 in-lbs
- Not the same as the no-washer version (06-82-7336) of the same size
- Order by exact part number to get the with-washer screw
- Correct thread, length, head, drive, washer, and grade for the joint
- Genuine Milwaukee replacement, not a generic hardware-store screw
- Sold individually
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 06-82-7337
- Official Description: M4 x 20mm Pan Hd. ST T-10 w/Washer Screw
- Component Type: Self-tapping pan head T-10 screw with captive washer (gearbox fastener)
- Thread, Length, Drive: M4 x 20mm, self-tapping, T-10 Torx, with integral washer; seating torque about 8 to 10 in-lbs
- Primary Fitment: Gearbox fastener for many Milwaukee drills, drivers, and hammer drills (for example, M18 brushless hammer drills 2902-20 and 2904 series), typically quantity four
- Also Referenced On: Additional Milwaukee tools; Milwaukee's application list is not complete, so verify using Milwaukee's online parts lookup
- Parts Diagram Position: Varies by tool (for example, Figure 9 or Figure 12); confirm on your tool's diagram
- Quantity: Sold individually; many tools use four
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) M4 x 20mm pan head T-10 screw with captive washer
The tool and the gearbox are NOT included and are sold separately. Many tools use four of these screws, so order the quantity your tool requires. Always verify by serial number using Milwaukee's online parts lookup before ordering, and order by the exact part number, since the no-washer version (06-82-7336) is a different part.
