Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee 1/4-20 x 5/8 in. Pan Head Taptite Torx Screw
Model Number: 06-82-5320
The Milwaukee 06-82-5320 is a genuine OEM 1/4-20 x 5/8 in. pan head Taptite Torx screw, a thread-forming fastener used across a range of Milwaukee tools. Taptite is a thread-forming design: the screw displaces and forms its own mating threads as it is driven into a pre-drilled pilot hole in metal, which eliminates the need for a pre-tapped thread in the receiving material and creates a tight, vibration-resistant interference fit. It has a 1/4-20 thread, a 5/8 in. length, a pan head, and a Torx drive, and the Torx recess gives the higher torque transfer and reduced cam-out that thread-forming into metal requires. Using the genuine Milwaukee OEM screw ensures the correct thread-forming profile, length, drive, and head for the fastener interface, where a non-OEM screw can mis-form the threads in the metal boss or fail to clamp the joint securely.
This screw is a standard Milwaukee component with multiple applications, used on band saws, chop saws, circular saws, drills, and sanders, among others, so check your model's parts diagram for the figure position and the quantity required. This part replaces obsolete part numbers 06-95-0212 and 06-95-0217. Note that Milwaukee makes 1/4-20 pan Taptite Torx screws in several lengths, including 5/8 in., 7/8 in., 1 in., and 1-1/4 in., so order this one by its exact part number and length to be sure you get the right screw. Because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering, since running production changes can alter part compatibility within the same catalog number.
Features
- Genuine Milwaukee OEM pan head Taptite Torx screw
- 1/4-20 thread, 5/8 in. length
- Pan head with Torx drive
- Taptite thread-forming design cuts its own threads in metal, no pre-tapping required
- Thread-forming interference fit resists loosening under vibration
- Torx drive provides high torque transfer and reduced cam-out
- Standard multi-application fastener across band saws, chop saws, circular saws, drills, and sanders
- Replaces obsolete part numbers 06-95-0212 and 06-95-0217
- Correct thread-forming profile, length, drive, and head for the joint
- Order by exact length; 1/4-20 also comes in 7/8 in., 1 in., and 1-1/4 in.
- Genuine Milwaukee replacement, not a generic hardware-store screw
- Sold individually
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 06-82-5320
- Official Description: 1/4-20 x 5/8 Pan Head Taptite Torx Screw
- Component Type: Thread-forming pan head Torx screw (fastener)
- Thread, Length, Drive: 1/4-20 thread, 5/8 in. length, Torx drive, pan head; thread-forming (Taptite)
- Primary Fitment: Standard Milwaukee fastener with multiple applications (band saws, chop saws, circular saws, drills, sanders); confirm your tool using Milwaukee's online parts lookup
- Also Referenced On: Replaces obsolete part numbers 06-95-0212 and 06-95-0217
- Parts Diagram Position: Varies by tool; confirm the figure position on your tool's service parts diagram
- Quantity: Sold individually; confirm the quantity your tool uses on its diagram
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) 1/4-20 x 5/8 in. pan head Taptite Torx screw
The tool and the mating components are NOT included and are sold separately. Always verify by serial number using Milwaukee's online parts lookup before ordering, and order by the exact part number and length, since Milwaukee makes 1/4-20 pan Taptite Torx screws in several lengths.
