Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukees website please click here:
Milwaukee 3/8 in. DG50 Thread-Forming Screw
Model Number: 06-82-3900
The Milwaukee 06-82-3900 is a genuine OEM 3/8 in. DG50 Flat Head T-20 Torx Thread-Forming Screw for compatible Milwaukee M18 SAWZALL Reciprocating Saws including the 2620-20 and related models. The DG50 designation identifies Milwaukee's proprietary thread-forming fastener profile — a screw engineered to displace and form its own mating threads as it is driven into a pre-drilled or molded pilot hole, eliminating the need for a pre-tapped thread in the receiving material. The thread-forming process creates a precision-fit interference thread that provides strong resistance to loosening under the vibration and dynamic reciprocating loads generated during SAWZALL operation. The flat head profile features a countersunk taper that allows the screw head to sit flush with or below the surrounding assembly surface — keeping the head out of the way of adjacent components and maintaining a clean, snag-free tool body surface. The T-20 Torx drive provides superior torque transfer and reduced cam-out compared to Phillips or slotted drives, well suited for the controlled installation torque required during thread-forming. A stripped, broken, or missing screw requires replacement to restore proper assembly integrity and safe saw operation.
Using a genuine Milwaukee OEM DG50 thread-forming screw ensures the correct proprietary thread profile, 3/8 in. nominal size, T-20 Torx drive, and flat head geometry for the fastener interface it serves. Non-OEM screws may not match the original DG50 thread-forming profile, leading to improper thread formation or insufficient clamping force at the joint. Always verify your catalog number and serial number on Milwaukee's website before ordering to confirm this is the correct screw for your specific unit.
Features
- Genuine Milwaukee OEM 3/8 in. DG50 thread-forming screw for compatible Milwaukee M18 SAWZALL saws
- DG50 thread-forming design cuts its own threads — no pre-tapping required
- Thread-forming interference fit resists loosening under reciprocating vibration loads
- Flat head sits flush with the assembly surface to avoid interference with adjacent components
- T-20 Torx drive provides superior torque transfer and reduced cam-out during installation
- Verify catalog number and serial number on Milwaukee's website before ordering
Specifications
- Size: 3/8 in.
- Thread Type: DG50 Thread-Forming
- Drive: T-20 Torx
- Head Style: Flat Head (Countersunk)
Includes
- (1) Milwaukee 06-82-3900 3/8 in. DG50 Thread-Forming Screw
