Product Description
**Milwaukee parts change not only by model# but also by serial number. Milwaukee's site lets you look up your tool's parts diagram. Enter Cat# and Select Service Parts. Also match Serial Number.
Milwaukee Screw, M5 x 23mm Pan Head Torx T-25
Model Number: 06-81-9555
The Milwaukee 06-81-9555 is a genuine OEM Screw, an M5 x 23 mm pan head Torx T-25 machine screw used in Milwaukee tool assemblies. The M5 designation is the thread, a 5 mm metric diameter, and the "M Screw" is a machine screw that threads into a formed or tapped mating thread, driven with a T-25 Torx bit in a pan head. On the tools it serves it is a structural fastener, holding the gear case and handle together under load, so the correct thread, length, drive, and head all matter for the screw to clamp the joint at the proper torque. Fitting the genuine Milwaukee OEM screw ensures the right M5 thread, 23 mm length, and Torx T-25 pan head for the location it serves, where a screw of the wrong size or type may strip the thread, bottom out, or fail to hold the joint.
This screw is identified as the M5 x 23 mm Pan Head Torx T-25 M Screw on the Milwaukee service parts lists for the 2966-20 and 2967-20 M18 FUEL 1/2 in. High Torque Impact Wrenches, where four of them hold the gear case (Figure 55, bulletins 54-26-2905 and 54-26-2910), and it is also used on other Milwaukee tools, such as in a handle kit. Milwaukee specifies seating this screw to about 65 lb-in on the impact wrenches, and it assigns different part numbers to screws that differ in thread, length, drive, or head, so the fastener is not interchangeable by eye. Order this screw by its exact part number, 06-81-9555, from your tool's service parts diagram, order the quantity the diagram shows, and because Milwaukee specifies service parts by serial number as well as catalog number, verify your catalog and serial number against the official Milwaukee service parts diagram before ordering.
Features
- Genuine Milwaukee OEM screw
- M5 x 23 mm pan head Torx T-25 machine screw
- M5 metric thread, 5 mm diameter
- Torx T-25 drive, pan head
- Machine screw ("M Screw") for a formed or tapped mating thread
- Gear case screw on the 2966-20 and 2967-20 M18 FUEL impact wrenches (four used)
- Figure 55 on those diagrams (bulletins 54-26-2905 and 54-26-2910)
- Also used on other Milwaukee tools, such as in a handle kit
- Milwaukee specifies about 65 lb-in seat torque on the impact wrenches
- Order by exact part number and the quantity the diagram shows
- Sold individually
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 06-81-9555
- Official Description: M5 x 23 mm Pan Head Torx T-25 M Screw (machine screw)
- Component Type: Metric machine screw / fastener
- Thread: M5 (5 mm metric)
- Length: 23 mm
- Drive and Head: Torx T-25, pan head
- Primary Fitment: Milwaukee 2966-20 and 2967-20 M18 FUEL 1/2 in. High Torque Impact Wrenches (gear case, four used); also other Milwaukee tools
- Quantity: Sold individually (check the diagram for the quantity your tool uses)
- Part Type: Genuine Milwaukee OEM Replacement Part
Includes
- (1) Screw (M5 x 23 mm Pan Head Torx T-25)
Order this screw by its exact part number, since screws of different thread, length, drive, and head use different part numbers and are not interchangeable; the impact wrenches use four of this screw at the gear case, so order the quantity your diagram shows. Always verify by serial number using Milwaukee's online parts lookup before ordering.
