Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee Shoulder Screw
Model Number: 06-81-0075
The Milwaukee 06-81-0075 Shoulder Screw is a genuine OEM replacement fastener used across a wide range of Milwaukee bandsaw platforms, including the 2529-20 M12 FUEL Band Saw, the M18 FUEL Deep Cut Bandsaws (2729-20, 2729-21, 2729-22, 2729S-20), the M18 FUEL Compact Bandsaws (2829-20, 2829S-20), and the corded Deep Cut Bandsaws (6232-20, 6232-21, 6238-20, 6238-21). Identified as Figure 93 on Milwaukee service bulletin 54-40-6240 (6232-20) and referenced across the M18 FUEL bandsaw bulletins, the shoulder screw is part of the blade guide and tension assembly at the front of the bandsaw, where it works with the tension bushings (Milwaukee 42-40-0115), wear plate (44-66-6232 on corded platforms), support plate, and blade tension springs to maintain correct blade tracking and tension across the front pulley path. Milwaukee specifies three of these shoulder screws per bandsaw, so if you are replacing one due to wear, breakage, or thread damage, it is good practice to inspect all three positions and replace any showing similar wear.
A shoulder screw is a precision-machined fastener with an unthreaded cylindrical shank (the shoulder) between the head and the threaded end. Unlike a standard screw, the shoulder serves as a bearing surface, pivot point, or precision-fit location feature for adjacent components, providing both fastening and mechanical alignment in a single part. On a bandsaw blade guide assembly, the shoulder allows the tension bushings and adjacent components to pivot or float on the screw shank while the threaded end provides the secure clamping force. Substituting a generic screw at this location will not preserve the shoulder geometry the blade guide assembly was designed around, which can result in misalignment, premature wear of the bushings and wear plate, and inconsistent blade tracking. Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee bandsaw service parts diagram before ordering, since Milwaukee occasionally implements running production changes that affect part compatibility within the same catalog number. Verify by serial number using Milwaukee's online parts lookup before ordering to confirm correct fitment.
Features
- Genuine Milwaukee OEM replacement, direct factory part for the 06-81-0075 reference
- Cross-platform compatibility with multiple Milwaukee bandsaws when verified by serial number
- Used in the blade guide and tension assembly at the front of the bandsaw
- Precision-machined shoulder screw with unthreaded cylindrical shank for bushing pivot and alignment
- Works with tension bushings (Milwaukee 42-40-0115) and adjacent blade guide components
- Milwaukee specifies three of these shoulder screws per bandsaw, recommended to replace all three together when one fails
- Manufactured to Milwaukee factory thread specifications, shoulder geometry, and material standards
- Direct-fit replacement, no modification required for installation
- Restores correct blade guide assembly alignment and clamping force after wear, thread damage, or breakage
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 06-81-0075
- Official Description: Shoulder Screw
- Component Type: Precision Shoulder Screw, Blade Guide Assembly Fastener
- Confirmed Compatible Models: 2529-20 M12 FUEL Band Saw, 2729-20/2729-21/2729-22/2729S-20 M18 FUEL Deep Cut Bandsaws, 2829-20/2829S-20 M18 FUEL Compact Bandsaws, 6232-20/6232-21/6238-20/6238-21 Corded Deep Cut Bandsaws
- Quantity Required Per Tool: 3 shoulder screws per bandsaw
- Service Bulletin References: 54-40-6240 (6232-20 Fig 93), and across M18 FUEL bandsaw bulletins
- Quantity: Sold individually, 1 shoulder screw per order
- Part Type: OEM Service Replacement Fastener
Includes
- (1) Milwaukee 06-81-0075 Shoulder Screw
- Note: Milwaukee specifies three of these shoulder screws per bandsaw. Order quantity 3 if replacing all positions in the blade guide assembly
- Note: Verify your tool's catalog number and serial number against the official Milwaukee parts diagram before ordering
