Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukee's website please click here:
Milwaukee M Screw #10-32 Hexagon Recess
Model Number: 06-75-2117
The Milwaukee 06-75-2117 M Screw #10-32 Hexagon Recess is a genuine OEM replacement service fastener used across Milwaukee's M18 18-Gauge cordless shear family, with confirmed fitment on both the Milwaukee 2635-20 M18 18 Gauge Double Cut Shear and the Milwaukee 2637-20 M18 18 Gauge Single Cut Shear. The two shears are sister products built around the same redesigned body, inline wrist ergonomic design, 360-degree tool-free rotating head, and M18 cordless platform, so they naturally share common internal service fasteners across the blade clamp, cutter head, and internal housing positions. The 2635-20 Double Cut variant is optimized for straight cuts in larger sheet metal panels with minimum distortion (removes a continuous waste curl strip), while the 2637-20 Single Cut variant is optimized for curve cuts, trim work, and finish cuts where the workpiece must remain intact (no waste curl). Both shears cut up to 18-gauge steel and 20-gauge stainless steel.
The screw specification is #10-32 UNF (the standard imperial fine machine screw thread used at this wire gauge size, approximately 3/16 in. diameter at 32 threads per inch) with a hexagon recess (internal Allen) drive recess for high-torque installation in tight spaces where a slot, Phillips, or external Torx drive would not fit or cam out. The hexagon recess geometry delivers full driver-to-fastener engagement under high installation torque, which is the standard Milwaukee design choice at blade clamp positions, cutter head mounting points, and internal housing fastener locations on professional-grade shears where cutting vibration loads can loosen lesser fastener designs. A stripped, broken, missing, or corroded service screw can compromise the assembly integrity of the shear and prevent proper reassembly after blade service, cutter head replacement, or internal component repair. Replacing the screw with this OEM service part restores correct clamping load and torque retention at the engineered Milwaukee specification. Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee service parts diagram before ordering, and confirm the quantity of screws required at your specific service location. The 06-75-2117 is part of Milwaukee's broader 06-75-21XX socket head / hexagon recess machine screw family, which includes the related 06-75-2115 Socket Head Cap Screw and 06-75-2402 #10-32 x 9/16 in. Socket Head Cap Screw used across various other Milwaukee tool platforms - these are NOT interchangeable with the 06-75-2117. Verify by serial number using Milwaukee's online parts lookup before ordering to confirm correct fitment.
Features
- Genuine Milwaukee OEM replacement service screw, direct factory part for the 06-75-2117 reference
- M Screw with #10-32 UNF thread specification and hexagon recess (Allen) drive
- Cross-platform fitment across Milwaukee's M18 18-Gauge cordless shear family
- Confirmed fitment on the Milwaukee 2635-20 M18 18 Gauge Double Cut Shear (optimized for straight cuts with waste curl)
- Confirmed fitment on the Milwaukee 2637-20 M18 18 Gauge Single Cut Shear (optimized for curve cuts and finish work)
- Both compatible shears cut 18-gauge steel and 20-gauge stainless steel
- #10-32 (approximately 3/16 in. diameter) at 32 threads per inch UNF fine thread
- Hexagon recess delivers full driver-to-fastener engagement under high installation torque
- Standard Milwaukee design at blade clamp positions, cutter head mounting points, and internal component fastener locations
- Resistant to cam-out and slip under cutting vibration loads
- Part of Milwaukee's 06-75-21XX socket head / hexagon recess machine screw family
- Manufactured to Milwaukee factory tolerances and material specifications
- Direct-fit replacement, no modification required for installation
- Restores correct fastener torque retention and engineered clamping load
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 06-75-2117
- Official Description: M Screw #10-32 Hexagon Recess
- Component Type: Service Machine Screw with Hexagon (Allen) Drive Recess
- Thread Specification: #10-32 UNF
- Wire Gauge Diameter: Approximately 3/16 in. (4.83mm)
- Threads Per Inch: 32 (Fine thread)
- Drive Recess: Hexagon (Allen)
- Confirmed Compatible Models: Milwaukee 2635-20 M18 18 Gauge Double Cut Shear, Milwaukee 2637-20 M18 18 Gauge Single Cut Shear
- Tool Family: Milwaukee M18 Cordless 18-Gauge Shears
- May also fit additional Milwaukee tool platforms using the same fastener specification (verify by serial number)
- Related Part Numbers in Family: 06-75-2115 Socket Head Cap Screw, 06-75-2402 #10-32 x 9/16 in. Socket Head Cap Screw (different specifications, sold separately)
- Quantity: Sold individually, 1 screw per order
- Part Type: OEM Service Replacement Fastener
Includes
- (1) Milwaukee 06-75-2117 M Screw #10-32 Hexagon Recess
- Note: Milwaukee uses multiple #10-32 screw part numbers across their tool lineup (different lengths, head geometries, and drive recesses). This part (06-75-2117) is NOT a generic hardware-store substitute and is NOT interchangeable with the closely-numbered 06-75-2115 or 06-75-2402 service screws
- Note: Verify your tool's catalog number (2635-20, 2637-20, or other Milwaukee tool) and serial number against the official Milwaukee parts diagram before ordering, and confirm the quantity of screws required at your specific service location
