Product Description
**Milwaukee parts change not only by model# but also by serial number. To look up your tools parts break down on Milwaukees website please click here:
Milwaukee Blade Fastener for M12 and M18 FUEL Multi-Tools
Model Number: 06-75-1015
The Milwaukee 06-75-1015 is a genuine OEM Blade Fastener for the Milwaukee M12 FUEL Multi-Tool (2526-20) and M18 FUEL Multi-Tool (2836-20). The blade fastener is the central bolt that clamps the oscillating accessory — such as a blade, sanding pad, or scraper — securely against the spindle flange of the multi-tool to prevent the accessory from shifting, vibrating loose, or detaching during the high-speed oscillating motion of the tool. This fastener features a double-start thread design with M6-1.00 thread specification — two thread starts allow the fastener to advance twice as far per rotation compared to a single-start thread, dramatically reducing the number of turns required to tighten and loosen the accessory for faster blade changes on the jobsite. A stripped, damaged, or missing blade fastener that can no longer generate sufficient clamping force to hold the accessory firmly on the spindle creates a safety hazard — requiring replacement to restore secure accessory retention and safe multi-tool operation.
Using a genuine Milwaukee OEM blade fastener ensures the correct double-start thread specification, 1.79 in. overall length, 0.74 in. head diameter, and head geometry for the spindle and accessory interface it serves. Non-OEM fasteners may not match the original double-start thread profile or dimensional tolerances, leading to improper thread engagement or insufficient clamping force at the accessory interface. Milwaukee parts can change by serial number within the same model — always verify your catalog number and serial number on Milwaukee's website before ordering to confirm this is the correct blade fastener for your specific unit.
Features
- Genuine Milwaukee OEM blade fastener for M12 FUEL Multi-Tool 2526-20 and M18 FUEL Multi-Tool 2836-20
- Double-start thread allows faster blade changes — advances twice per rotation vs. single-start thread
- Clamps oscillating accessories securely against the spindle flange during operation
- Prevents accessory shifting, vibration loosening, or detachment during use
- Verify catalog number and serial number on Milwaukee's website before ordering
Specifications
- Thread: M6-1.00 Double-Start (Right-Hand)
- Overall Length: 1.79 in.
- Head Diameter: 0.74 in.
- Head Height: 0.275 in.
Includes
- (1) Milwaukee 06-75-1015 Blade Fastener
