Product Description
**Milwaukee parts change not only by model# but also by serial number. Milwaukee's site lets you look up your tool's parts diagram.
Milwaukee Locking Pliers Adjustable Screw for TORQUE LOCK Pliers
Model Number: 06-14-0105
The Milwaukee 06-14-0105 is a genuine OEM Large Adjustable Bolt Service Kit for Milwaukee TORQUE LOCK Locking Pliers and Clamps, referenced by Milwaukee on service bulletin 54-49-3130 as the Adjustable Bolt Kit, and also called the adjustment bolt or adjustable screw. It is the thumb screw at the end of the lower jaw handle that controls the jaw opening width - turning it clockwise closes the jaw opening for smaller workpieces, while turning it counterclockwise widens the opening for larger material. Setting the correct jaw width before locking ensures the pliers grip the workpiece with maximum clamping force at the correct position in the over-center locking mechanism. Milwaukee's TORQUE LOCK adjustment bolt features a through-hole design that accepts a screwdriver for generating additional torque when fine-tuning the jaw width setting, and it also serves as the pivot the middle plate draws back against during spring replacement. A stripped, bent, or missing adjustment bolt that can no longer be turned, or that prevents the jaw from being set to the correct width, requires replacement to restore proper jaw adjustment and full locking performance.
Because Milwaukee Tool specifies replacement parts by both catalog number and serial number, always verify your tool's serial number against the official Milwaukee service parts diagram before placing your order, since running production changes can alter part compatibility within the same catalog number. On bulletin 54-49-3130 the 06-14-0105 Adjustable Bolt Kit is the correct bolt kit for fourteen TORQUE LOCK models: the 48-22-3410 and 48-22-3420 10 in. Curved Jaw pliers, the 48-22-3510 and 48-22-3810 10 in. Straight Jaw pliers, the 48-22-3520 18 in. Swivel C-Clamp, the 48-22-3521 11 in. Swivel C-Clamp, the 48-22-3529 18 in. C-Clamp, the 48-22-3530 18 in. C-Clamp, the 48-22-3531 and 48-22-3631 11 in. C-Clamps, the 48-22-3541 Large Jaw Locking Plier, the 48-22-3542 Locking Chain, and the 48-22-3610 and 48-22-3710 10 in. MAXBITE pliers. Note that smaller TORQUE LOCK models use a different adjustment bolt kit - the 7 in. and 9 in. sizes use 06-14-0110, the 5 in. and 6 in. sizes use 06-14-0115, and the 4 in. sizes use 06-14-0035 - so confirm your exact catalog number before ordering. Each of these fourteen tools uses the 40-50-0945 Spring Service Kit as its companion part, which is sold separately and is commonly replaced at the same time as the adjustment bolt during a full plier rebuild.
Features
- Genuine Milwaukee OEM Adjustable Bolt Service Kit for TORQUE LOCK locking pliers and clamps
- Referenced by Milwaukee on bulletin 54-49-3130 as the Adjustable Bolt Kit, also called the adjustment bolt
- Fits fourteen TORQUE LOCK models: 48-22-3410, 48-22-3420, 48-22-3510, 48-22-3520, 48-22-3521, 48-22-3529, 48-22-3530, 48-22-3531, 48-22-3541, 48-22-3542, 48-22-3610, 48-22-3631, 48-22-3710, and 48-22-3810
- Covers 10 in. Curved Jaw, 10 in. Straight Jaw, 11 in. and 18 in. C-Clamp, Swivel C-Clamp, Large Jaw Locking, Locking Chain, and 10 in. MAXBITE models
- Controls jaw opening width for precise presetting before locking onto the workpiece
- Through-hole design accepts a screwdriver for additional torque during fine adjustment
- Draws back to free the middle pivot plate during spring kit installation
- Correct thread specification and knob geometry for the TORQUE LOCK plier body
- Companion to the 40-50-0945 Spring Service Kit used by all fourteen of these models
- Direct-fit replacement requiring no modification to the plier body
- Restores proper jaw adjustment and full over-center locking force
- Verify catalog number and serial number on Milwaukee's website before ordering
Specifications
- Manufacturer: Milwaukee Tool
- Part Number: 06-14-0105
- Official Description: Adjustable Bolt Service Kit (Adjustment Bolt)
- Component Type: Jaw Width Adjustment Bolt Kit
- Primary Fitment: TORQUE LOCK models 48-22-3410, 48-22-3420, 48-22-3510, 48-22-3520, 48-22-3521, 48-22-3529, 48-22-3530, 48-22-3531, 48-22-3541, 48-22-3542, 48-22-3610, 48-22-3631, 48-22-3710, and 48-22-3810
- Companion Part: 40-50-0945 Spring Service Kit (sold separately)
- Parts Diagram Position: Adjustable Bolt Kit column, Bulletin 54-49-3130
- Quantity: Sold individually, (1) required per plier
- Part Type: Genuine Milwaukee OEM Service Kit
Includes
- (1) Milwaukee 06-14-0105 Adjustable Screw
This part is the single adjustable screw only. The 40-50-0945 Spring Service Kit is NOT included and is sold separately - it is the companion service part for all fourteen compatible models and is commonly replaced at the same time. Always verify by serial number using Milwaukee's online parts lookup before ordering.
